Heavy Duty Headliner Carpet Adhesive Aerosol Can Spray Sustained Glue Waterproof
- Compatible Material Plastic
- Color Clear
- Item Package Quantity 1
- Package Information Can
- Extreme Holding Power - High Strength And High Temperature Spray Adhesive; Especially Effective In Repairing Automotive Headliners; Carpet; Trunk Linings; And More
- Easy Application- Permatex Headliner Adhesive Is Designed For Repairing Interior Parts That Have Become Detached Or Loosened; Dries Clear For Neat Appearance
- Resist The Elements - Permatex Headliner Adhesive Is Resistant To Extreme Weather Conditions Like Rain; Sleet; And Snow Because Of The Water-Resistant Formula
- Professional Grade- Headliner Adhesive That Has A High Temperature Formula And Maintains High Strength At Temperatures Up To 170°F (77°C) For An Industrial Strength Hold
- Suggested Applications - Headliners; Carpets; Trunk Linings; Inside Door Panels; And Other Interior Applications Where Material Has Become Detached Or Loose
- Permatex Body Shop Heavy Duty Headliner and Carpet Adhesive Aerosol Can
- High-strength spray adhesive designed for repairing interior parts which have become detached or loosened. Resistant to extreme weather conditions. Water-resistant. Dries clear for neat appearance. High temperature formula maintains high strength at temperatures up to 170°F (77°C).
- Automobile Suggested Applications: Headliners, carpets, trunk linings, and inside door panels.
- Heavy Duty Suggested Applications: Headliners, carpets, trunk linings and inside door panels
- Marine Suggested Applications: Excels at attaching boat upholstery cloth, carpeting, floor mats, insulation, kick and silencer pads to metal, wood or KB board
DIRECTIONS
- Product may attack some plastics or painted surfaces. Masking tape can be used to protect these areas, but should be removed immediately after application.
- Make sure all surfaces are clean, dry and free from any contaminates.
- Shake can before use.
- Turn nozzle to select spray pattern width; low, medium or high.
- Hold can 6-8 inches from work surface and apply 2-3 uniform overlapping coats. Allow a minimum of 5 minutes drying time between coats. Apply additional coats in opposite direction from first. For stronger bonds, apply adhesive to both surfaces.
- Allow adhesive to dry for 5 minutes, or until tacky, before setting.
- Press surfaces together with uniform pressure, eliminating air pockets. Bonds should be made within 30 minutes of application. Full cure is achieved in 24 hours at 70°F(21°C).
- To prepare can for next use, invert, and dispense until spray is free of adhesive.