Product characteristics

• support Optical Power Meter
• supporting RJ45 testing
• support LED lighting
• support automatic shutdown
• support backlight switch
• support wavelength memory
• support user calibration
• supporting SC/FC/ST/LC interface（LC interface is optional）
• supporting simultaneous display of linear mW and non-linear index dBm
• supporting external power supply such as charging treasure,computer.etc.

 

Specification

• Wavelength Range:800~1700nm
• Connector:FC/SC/ST/LC universal interface（LC interface is optional）
• Detector Type:InGaAs
• Power Test Range: 70~+6dBm
• Uncertainty:±5％
• Standard Wavelength:850/980/1300/1310/1490/1550/1625/1650nm
• Display Resolution:Linear display:0.1%,Logarithmic display:0.01dBm
• RJ45 Cable Sequence(standard):Test Distance 300m
• Battery:2*AAA Battery (Not in cluding)
• Battery Duration:≥72h(OPM)
• Auto matic Shutdown Time:10min
• Working Temperature:-10℃~+50℃
• Storage Temperature:-40℃~+70℃
• Dimension:112*66*30mm
• Net weight:140g

 

Product list

• 1x Fiber Optical Power Meter
• 1x RJ45 module
  
• 1x User Manual

 

Key function: 
LIGHT key:turns on/off the backlight

dB key:
Press the "dB" button to realize the relative power test (insertion loss test) or absolute power test. After entering the relative power test mode, the insertion loss (dB) will be displayed at the bottom of the screen, and the reference value will be displayed in the second line of the screen.
Hold the "dB" key for 3 seconds to turn RJ45 test mode on or off.

REF key:
Press the "REF" button to set the current optical power as the reference value and enter the relative power test (insertion loss test) mode. The second line of the display will show the reference value set, and the third line will show the relative power value (insertion loss dB).

λ key:
Wavelength switching function: multiple wavelength switching, ordinal 850nm,980nm,1300nm,1310nm,1490nm, 1550nm,1625nm,1650nm,shut down automatically save the last test using wavelength.

LED key:
LED lighting function: press "LED" to turn on and off LED lighting. 

User calibration mode:
Press "LED"+"LIGHT" to enter the user calibration mode:
1st power key: Save
LIGHT key:+0.05dB
dB key:-0.05dB

"λ" key:Wavelength switching

RESET
Press the "LED"+"REF" key at the same time, and the full screen will show that the recovery is successful.