Intake Exhaust Valves Fits Ford Mazda Mercury 2.0L 2.3L 2.5L DOHC 16V

DESCRIPTION:

Interchange Part Number:    9S4Z-6507-C, 9S4Z-6505-A, 9S4Z6507C, 9S4Z6505A, IV432, EV432

 

The main function of an engine valve is to open and close rapidly. This allows the air and fuel charge to enter the combustion chamber and after ignition, the exhaust valve allows the waste gases to flow out into the exhaust system. Each cylinder has at least one intake and one exhaust valve. Good engine performance depends on valve condition. Worn guides or stems and burned or badly seated valves allow gas to escape under compression, resulting in poor starting and loss of power. Symptoms of a bad or failing engine valve: engine misfire, excessive oil consumption. Be sure to have your engine valves replace with aftermarket replacement engine valves as soon as it starts to give you trouble.

 

Key Features:

    Designed to unlock more performance out of your vehicle

    Ensure smooth, reliable operation and long-lasting service

    Made tough to withstand high loads and stresses

    Deliver a reasonable balance of strength and durability

    Surface hardened and polished for strength and reduced friction

 

Installation Tips:

Before installation, make sure your car car engine is cool. Then you can install the tool on the engine valve.

Put the tool on the engine, hold the intake and exhaust tool tightly.

After installation, the tools can work well on the intake and exhaust engine valve.

 

Fitment

YEAR     MAKE    MODEL  ENGINE

2013-2016  FORD    C-MAX   2.0L 121CID L4 DOHC(16 VALVE)

2005-2008  FORD    ESCAPE    2.3L 140CID L4 DOHC(16 VALVE)

2009-2016  FORD    ESCAPE    2.5L 2488CC 152CID L4 DOHC(16 VALVE)

2005-2016  FORD    FOCUS  2.0L 121CID L4 DOHC(16 VALVE)

2003-2007  FORD    FOCUS  2.3L 140CID L4 DOHC(16 VALVE)

2013-2016  FORD    FUSION 2.0L 121CID L4 DOHC(16 VALVE)

2006-2009  FORD    FUSION 2.3L 140CID L4 DOHC(16 VALVE)

2010-2016  FORD    FUSION 2.5L 2488CC 152CID L4 DOHC(16 VALVE)

2001-2011  FORD    RANGER    2.3L 140CID L4 DOHC(16 VALVE)

2010-2013  FORD    TRANSIT CONNECT     2.0L 121CID L4 DOHC(16 VALVE)

2014-2016  FORD    TRANSIT CONNECT     2.5L 2488CC 152CID L4 DOHC(16 VALVE)

2013-2016  LINCOLN    MKZ  2.0L 121CID L4 DOHC(16 VALVE)

2011-2012  LINCOLN    MKZ  2.5L 2488CC 152CID L4 DOHC(16 VALVE)

2004-2013  MAZDA  3   2.0L 121CID L4 DOHC(16 VALVE)

2004-2009  MAZDA  3   2.3L 140CID L4 DOHC(16 VALVE)

2010-2013  MAZDA  3   2.5L 2488CC 152CID L4 DOHC(16 VALVE)

2012-2015  MAZDA  5   2.5L 2488CC 152CID L4 DOHC(16 VALVE)

2003-2008  MAZDA  6   2.3L 140CID L4 DOHC(16 VALVE)

2009-2013  MAZDA  6   2.5L 2488CC 152CID L4 DOHC(16 VALVE)

2001-2009  MAZDA  B2300    2.3L 140CID L4 DOHC(16 VALVE)

2010-2012  MAZDA  CX-7 2.5L 2488CC 152CID L4 DOHC(16 VALVE)

2006-2015  MAZDA  MX-5 MIATA   2.0L 121CID L4 DOHC(16 VALVE)

2005-2006  MAZDA  TRIBUTE    2.3L 140CID L4 DOHC(16 VALVE)

2008 MAZDA  TRIBUTE    2.3L 140CID L4 DOHC(16 VALVE)

2009-2011  MAZDA  TRIBUTE    2.5L 2488CC 152CID L4 DOHC(16 VALVE)

2005-2008  MERCURY  MARINER   2.3L 140CID L4 DOHC(16 VALVE)

2009-2011  MERCURY  MARINER   2.5L 2488CC 152CID L4 DOHC(16 VALVE)

2006-2009  MERCURY  MILAN   2.3L 140CID L4 DOHC(16 VALVE)

2010-2011  MERCURY  MILAN   2.5L 2488CC 152CID L4 DOHC(16 VALVE)

 

Parts Included:       

8 Intake Valves

8 Exhaust Valves

 

NOTE:

Please check compatible for your vehicle.

Year, make, model and engine size.

 

General Policies

Dear customer,if you have any questions,you can contact us,we will provide the best service for you.

Shipping policy

The item will be shipped within 24 hours on payment received except the holidays.(except weekends & official holidays). You can log on to eBay to check your logistics tracking number.

Please confirm address before purchase, and cannot change address once purchased.

If you need to receive the item quickly, please contact us, you can pay the postage to choose other logistics.

Payment:

Please purchase and pay for the item through the eBay,only accpected the paypal payment.

Returns:

Please contact us first when return, exchange and refund is required. Any direct return of purchased items will not be processed.

Item must be returned in new condition, as received with all accompanied accessories and literature, including the factory carton. Shipping, handling is not refundable unless item is returned because of defect.

If the product is defective or damage upon arrival,please contact us immediately,we will provide the solve the problem. Returns accepted within 30 days of delivery date and item must be in new condition.

About us:

Our goal is complete customer satisfaction. We will be very honored to provide you with quality service.

If there is an issue with shipping or the item you purchased please contact us via ebay message or call us before opening a case or leaving feedback.We will try our best to resolve any kind of issue.

Intake Exhaust Valves Fits Ford Mazda Mercury 2.0L 2.3L 2.5L DOHC 16V

DESCRIPTION:

Interchange Part Number:    9S4Z-6507-C, 9S4Z-6505-A, 9S4Z6507C, 9S4Z6505A, IV432, EV432

 

The main function of an engine valve is to open and close rapidly. This allows the air and fuel charge to enter the combustion chamber and after ignition, the exhaust valve allows the waste gases to flow out into the exhaust system. Each cylinder has at least one intake and one exhaust valve. Good engine performance depends on valve condition. Worn guides or stems and burned or badly seated valves allow gas to escape under compression, resulting in poor starting and loss of power. Symptoms of a bad or failing engine valve: engine misfire, excessive oil consumption. Be sure to have your engine valves replace with aftermarket replacement engine valves as soon as it starts to give you trouble.

 

Key Features:

    Designed to unlock more performance out of your vehicle

    Ensure smooth, reliable operation and long-lasting service

    Made tough to withstand high loads and stresses

    Deliver a reasonable balance of strength and durability

    Surface hardened and polished for strength and reduced friction

 

Installation Tips:

Before installation, make sure your car car engine is cool. Then you can install the tool on the engine valve.

Put the tool on the engine, hold the intake and exhaust tool tightly.

After installation, the tools can work well on the intake and exhaust engine valve.

 

Fitment

YEAR     MAKE    MODEL  ENGINE

2013-2016  FORD    C-MAX   2.0L 121CID L4 DOHC(16 VALVE)

2005-2008  FORD    ESCAPE    2.3L 140CID L4 DOHC(16 VALVE)

2009-2016  FORD    ESCAPE    2.5L 2488CC 152CID L4 DOHC(16 VALVE)

2005-2016  FORD    FOCUS  2.0L 121CID L4 DOHC(16 VALVE)

2003-2007  FORD    FOCUS  2.3L 140CID L4 DOHC(16 VALVE)

2013-2016  FORD    FUSION 2.0L 121CID L4 DOHC(16 VALVE)

2006-2009  FORD    FUSION 2.3L 140CID L4 DOHC(16 VALVE)

2010-2016  FORD    FUSION 2.5L 2488CC 152CID L4 DOHC(16 VALVE)

2001-2011  FORD    RANGER    2.3L 140CID L4 DOHC(16 VALVE)

2010-2013  FORD    TRANSIT CONNECT     2.0L 121CID L4 DOHC(16 VALVE)

2014-2016  FORD    TRANSIT CONNECT     2.5L 2488CC 152CID L4 DOHC(16 VALVE)

2013-2016  LINCOLN    MKZ  2.0L 121CID L4 DOHC(16 VALVE)

2011-2012  LINCOLN    MKZ  2.5L 2488CC 152CID L4 DOHC(16 VALVE)

2004-2013  MAZDA  3   2.0L 121CID L4 DOHC(16 VALVE)

2004-2009  MAZDA  3   2.3L 140CID L4 DOHC(16 VALVE)

2010-2013  MAZDA  3   2.5L 2488CC 152CID L4 DOHC(16 VALVE)

2012-2015  MAZDA  5   2.5L 2488CC 152CID L4 DOHC(16 VALVE)

2003-2008  MAZDA  6   2.3L 140CID L4 DOHC(16 VALVE)

2009-2013  MAZDA  6   2.5L 2488CC 152CID L4 DOHC(16 VALVE)

2001-2009  MAZDA  B2300    2.3L 140CID L4 DOHC(16 VALVE)

2010-2012  MAZDA  CX-7 2.5L 2488CC 152CID L4 DOHC(16 VALVE)

2006-2015  MAZDA  MX-5 MIATA   2.0L 121CID L4 DOHC(16 VALVE)

2005-2006  MAZDA  TRIBUTE    2.3L 140CID L4 DOHC(16 VALVE)

2008 MAZDA  TRIBUTE    2.3L 140CID L4 DOHC(16 VALVE)

2009-2011  MAZDA  TRIBUTE    2.5L 2488CC 152CID L4 DOHC(16 VALVE)

2005-2008  MERCURY  MARINER   2.3L 140CID L4 DOHC(16 VALVE)

2009-2011  MERCURY  MARINER   2.5L 2488CC 152CID L4 DOHC(16 VALVE)

2006-2009  MERCURY  MILAN   2.3L 140CID L4 DOHC(16 VALVE)

2010-2011  MERCURY  MILAN   2.5L 2488CC 152CID L4 DOHC(16 VALVE)

 

Parts Included:       

8 Intake Valves

8 Exhaust Valves

 

NOTE:

Please check compatible for your vehicle.

Year, make, model and engine size.

 

General Policies

Dear customer,if you have any questions,you can contact us,we will provide the best service for you.

Shipping policy

The item will be shipped within 24 hours on payment received except the holidays.(except weekends & official holidays). You can log on to eBay to check your logistics tracking number.

Please confirm address before purchase, and cannot change address once purchased.

If you need to receive the item quickly, please contact us, you can pay the postage to choose other logistics.

Payment:

Please purchase and pay for the item through the eBay,only accpected the paypal payment.

Returns:

Please contact us first when return, exchange and refund is required. Any direct return of purchased items will not be processed.

Item must be returned in new condition, as received with all accompanied accessories and literature, including the factory carton. Shipping, handling is not refundable unless item is returned because of defect.

If the product is defective or damage upon arrival,please contact us immediately,we will provide the solve the problem. Returns accepted within 30 days of delivery date and item must be in new condition.

About us:

Our goal is complete customer satisfaction. We will be very honored to provide you with quality service.

If there is an issue with shipping or the item you purchased please contact us via ebay message or call us before opening a case or leaving feedback.We will try our best to resolve any kind of issue.

DataCaciques