UHF Band Wireless Audio Adapter Music Sound Wireless Wifi Transmitter Receiver With Audio Cable For iPad Projector
Product Model: AB-007
Packing list:
1 * Transmitter(Red indicator light)optional
1 * Receiver(Red and Green two-color indicator light)
2 * Audio Line (optional)
1 * User Guide
Transmitter function description
①Transmitting antenna: The wireless signal is sent by this antenna.
②Power button: Press and hold for 2 seconds to turn it on, Press and hold for 2 seconds to turn it off.
③Status indicator light: This Red indicator light is always on after power on.
④Pairing
button: The transmitter and receiver are paired and completed in the
factory, and the normal application does not need to be re-paired.
In
some cases, if the transmitter and receiver need to be re-paired, they
all need to press the pairing button for 2-3 seconds after booting up.
The Red status indicator light of transmitter will flashing. When the
pairing is successful, The Green signal indicator light of receiver will
flash three times in succession, It will automatically exit the pairing
state and get into the normal receiving mode.
If
more than one Receiver is needed, The transmitter needs to be in
pairing mode until all receivers have been paired, All other receivers
will be paired one by one in the same way. When all the receivers have
been paired successfully, Turn off and reboot the Transmitter.
Tips:
Please
do not press and hold the pairing button for a long time. It is
recommended to press and hold the pairing button for 2-3 seconds to
release the hand. Excessive pressing time may cause misoperation.
⑤Audio
input port: Plug the audio extension cable into this port and connect
it to the audio device output port through the audio extension cable.
⑥Power input port: 5V supply voltage, powered by 5V 1A power adapter.
Receiver function description
①Receiving antenna : The wireless signal is received by this antenna.
②Power button : Press and hold for 2 seconds to turn it on, Press and hold for 2 seconds to turn it off.
③Status
indicator light : If the receiver receives a signal after startup, The
Green signal indicator light and the Red power indicator light are
always on(The Green signal indicator light is brighter than the Red
power indicator). Otherwise, only the Red power indicator light is
always on.
④Pairing
button : The transmitter and receiver are paired and completed in the
factory, and the normal application does not need to be re-paired.
If you need to re-pair, follow the above process for pairing。
⑤Audio
output port : Plug the audio extension cable into this port and
connect it to the signal input port of the audio amplifier via an audio
extension cable.
⑥Power input port : 5V supply voltage, powered by 5V 1A power adapter.
Parameters Table:
Warning
1、Do not place the transmitter at a dead angle to keep the transmitted signal quality good.
2、When
using the receiver, try to avoid placing it closer to other wireless
transmitters, in order to avoid the interruption of the sound caused by
the interference of the received signal.
3、This product is made up of precision parts, Do not throw, throw, throw, etc. to avoid serious damage.
4、This product is not waterproof, do not let water directly into the inside of the casing.
5、Try to stay away from the electromagnetic sound field, high-voltage transmission network, and large metal objects.
Welcome to My Store