OnTheFly Jackplate - Electric

Electric On The Fly Jack Plate is the quietest jack plate on the market. IN STOCK SHIPS WITHIN 1-2 DAYS Our jack plates can be raised and lowered by an up/down push button while on the water within seconds from top to bottom. We have made it simple for YOU! Just mount the jack plate, connect it to the battery with our easy quick connectors, and go! Standard size is approved for up to 40hp motors (for motors without factory trim and tilt or standard BIA bolting pattern) Large size is approved for motors up to 90hp(for motors with factory trim and tilt or standard BIA bolting pattern) Works with 0-20hp motors with electric trim and tilt Our electric actuator mounts inside the jack plate housing 3 year warranty on the jack plate housing 1 year warranty on the electric actuator Pre-drilled for transom mounting (transom side pre-drilled holes are 8 inches across and 8 1/4 inches down from each other) The Electric Standard On The Fly Jack Plate is easy to install and connect wires to the battery. It comes with easy weatherproof connecters. All you have to do is just push the 2 connectors together once you have your relay harness hooked up to the battery and your new jack plate is working. Jack Plate housing made is the USA. WEIGHT: 23lbs JACK PLATE DIMENSIONS:• Height – 10 1/2”• Width (Transom Side) – 12 ½”• Width (Motor Side) – 13 ¼”• Set Back – 5” (total length from of transom side to the back of the motor slide)• Motor Plate Height – 12 ½”• Motor Mounting Plate (Inside Brackets where the motor would mount) – 10 ¾” MAX RISE (travel): 6 inches of travel. Plus, depending on where you mount the electric actuator you can get up to 8 inches of rise. ACCESSORIES INCLUDED: Jack plate housing, On The Fly Electric Actuator, Up/Down switch, relay harness, and 10 feet of wiring from the electric actuator and up/down switch to the battery. ACCESSORIES NOT INCLUDED: Transom mounting accessories are not included in purchase. On The Fly Jack Plates recommends• 4 each ½”- 3 1/2” long bolts – stainless steel• 4 each ½”- lock nuts – stainless steel• 8 each 1/2’”-flat washers – stainless steel• Motor Clamp Spacers • 3 year warranty on the jack plate housing • 1 year warranty on the jack

OnTheFly Jackplate - Electric

Electric On The Fly Jack Plate is the quietest jack plate on the market. 

IN STOCK SHIPS WITHIN 1-2 DAYS

Our jack plates can be raised and lowered by an up/down push button while on the water within seconds from top to bottom. We have made it simple for YOU! Just mount the jack plate, connect it to the battery with our easy quick connectors, and go!

  • Standard size is approved for up to 40hp motors (for motors without factory trim and tilt or standard BIA bolting pattern)
  • Large size is approved for motors up to 90hp(for motors with factory trim and tilt or standard BIA bolting pattern)
  • Works with 0-20hp motors with electric trim and tilt
  • Our  electric actuator mounts inside the jack plate housing
  • 3 year warranty on the jack plate housing
  • 1 year warranty on the electric actuator
  • Pre-drilled for transom mounting (transom side pre-drilled holes are 8 inches across and 8 1/4 inches down from each other)
  • The Electric Standard On The Fly Jack Plate is easy to install and connect wires to the battery. It comes with easy weatherproof connecters. All you have to do is just push the 2 connectors together once you have your relay harness hooked up to the battery and your new jack plate is working.
  • Jack Plate housing made is the USA.


WEIGHT: 23lbs

JACK PLATE DIMENSIONS:
• Height – 10 1/2”
• Width (Transom Side) – 12 ½”
• Width (Motor Side) – 13 ¼”
• Set Back – 5” (total length from of transom side to the back of the motor slide)
• Motor Plate Height – 12 ½”
• Motor Mounting Plate (Inside Brackets where the motor would mount) – 10 ¾”

MAX RISE (travel): 6 inches of travel. Plus, depending on where you mount the electric actuator you can get up to 8 inches of rise.

ACCESSORIES INCLUDED: Jack plate housing, On The Fly Electric Actuator, Up/Down switch, relay harness, and 10 feet of wiring from the electric actuator and up/down switch to the battery.

ACCESSORIES NOT INCLUDED: Transom mounting accessories are not included in purchase. On The Fly Jack Plates recommends
• 4 each ½”- 3 1/2” long bolts – stainless steel
• 4 each ½”- lock nuts – stainless steel
• 8 each 1/2’”-flat washers – stainless steel
• Motor Clamp Spacers

• 3 year warranty on the jack plate housing
• 1 year warranty on the jack

OnTheFlyJackplates Info


Shipping info

Click the Shipping & Payments tab above the listing description for more info

FREE Shipping

Click the Shipping & Payments tab above the listing description for more info!

Additional delivery notes

PICK UP OPTION

Sorry, our items are NOT available for pick-up.

PAYMENT


Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart.

We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.

We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).

The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws.

Thank you for shopping with us on eBay!

Additional Information

No additional information at this time

Ask seller a question

To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.

Ask seller a question

© Tiny Boat Nation

Shipping is FREE for this item

Accepted Payment Methods

Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart.

We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.

We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).

The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws.

Thank you for shopping with us on eBay!

Returns are accepted

Items must be returned within 14 days of the auction ending

Buyer will pay for return shipping.