Rane TTM 57SL DJ Mixer Parts
***USED PARTS SALVAGE***
Knob, Hi Mid Lo Gain Aux In/Out Main Booth
w/ Retainer Clip
***GOOD CONDITION***
***SEE GRADING SCALE BELOW***
Knob, Hi Mid Lo Gain Aux In/Out Main Booth
w/ Retainer Clip
***FAIR CONDITON***
***SEE GRADING SCALE BELOW***
Knob, P1 & P2
***GOOD CONDITION***
Knob, J1 & J2
***FAIR CONDITON***
***SEE PHOTOS***
Knob, Button Cap
***GOOD CONDITION***
Knob, Fader
***POOR CONDITION***
***SEE GRADING SCALE BELOW***
PCB, Fader Assembly PN/ 15160
***TESTED, NO FAULTS FOUND***
Potentiometer, Fader Alpha B20K Contour
(Avg 20 kOhm)
***TESTED, NO FAULTS FOUND***
Potentiometer, Fader Alps 803C-B20Kx2 Cue
20.9 kOhm
***TESTED, NO FAULTS FOUND***
Potentiometer, Alps 20 3B 75 2C No Half Mark
Gain / Aux In / Main / Booth / Aux Out / Phones
***TESTED, NO FAULTS FOUND***
Potentiometer, Alps 20 3B 81 8C/84 9C Half Mark
Pan, EQ High / Mid /Low / Mix High / Mic Low
***TESTED, NO FAULTS FOUND***
Encoder, K
P1 / P2
***NOT FULLY TESTED***
Switch, 4pin Push Button
***TESTED, NO ELECTICAL FAULTS***
***VERY SLIGHT MELTING AROUND CONNECTIONS DUE TO EXTRACTION***
***SEE PHOTOS***
Switch, 6pin Mic On
***TESTED, NO FAULTS FOUND***
XLR Jack 4pin PCB Mount
RCA Jack PCB Mount
***VERY SLIGHT MELTING AROUND CONNECTIONS DUE TO EXTRACTION***
***SEE PHOTOS***
TRS Jack 4pin PCB Mount
***MELTING AROUND CONNECTIONS DUE TO EXTRACTION***
***SEE PHOTOS***
USB Jack 6pin PCB Mount
Power Switch Chassis Mount
Ground Nut Assembly
Choke Filter PN/ 2030R5
Capacitor, Small w/ Heat Shrink
Capacitor, Large PN/ 5D28AW 400V 56uF
LED, Single White
Ribbon Cable Connector, 4.3" 10pin
Ribbon Cable Connector, 2.2" 14pin
Ribbon Cable Connector, 6.75" 5pin
Fader Cable Connector, 8" 6pin
Top Cover w/ LED PCB
***LEDs TESTED NO FAULTS FOUND***
PCB, Phone PN/ 16473
***POOR CONDITION***
***NO 1/4" PCB MOUNTS***
***VIAS HAVE SOME HEAT DAMAGE***
Fader Cover
***GOOD CONDITION***
***ONE CORNER HAS MINOR RUSTING***
**SEE PHOTOS***
Bottom Chassis
***SOME MINOR WEAR***
Back Chassis
***FIRST SOLD IN GOOD CONDITION***
***SECOND SOLD IN FAIR CONDITION***
***SEE PHOTOS***
Screw, Outside Top Cover/Headphone 7/32"
Screw, Outside Control PBC To Chassis 7/32"
Screw, Outside XLR/RCA 5/16"
Screw, Outside Motherboard To Chassis 1/4"
Nut, Outside TRS 7/16" I.D.
Screw, Inside Fader Assembly 15/32"
Screw, Inside Motherboard PCB 5/32"
Bracket, Inside Motherboard To Chassis 90°
Screw, Inside Motherboard To Bracket 7/32"
Lock Wash, Inside Motherboard To Bracket
Nut, Inside Motherboard To Bracket
Spacer, Inside Motherboard To Chassis 3/8"
Spacer, Inside Control PCB To Chassis 1/2"
Screw, Inside Control PCB To Spacer 1/4"
Spacer, Motherboard To Control PCB 2 3/16" Plastic
Cue Fader Support PCB Mount
https://www.rane.com/2015/01/22/introducing-the-rane-ttm57mkii-for-serato-dj/
"When introduced in 2006 the TTM57SL broke ground as the first ever DJ mixer with built-in USB sound card and tightly integrated Serato software controls. When discontinued in 2013, the TTM57SL had developed a cult-like following.
The TTM57mkII stays true to its original design by supporting familiar workflow while improving performance and software integration. Updated software controls include silicone RGB backlit pads for triggering 4 cue points per deck or the SP-6 sampler. Classic joystick controls toggle slip, instant doubles, internal mode, censor, and transform. Dedicated auto-loop & loop roll controls with back-lit buttons. Intuitive Serato DJ iZotope FX controls for easy & quick access.
The mixer features Rane's exclusive dual USB port architecture for intuitive DJ change over and supports creative dual computer applications. The TTM57mkII is a classic reborn.
Key improvements include:
Dual USB 2.0 high speed class compliant audio and MIDI USB ports:
No driver required on Mac
High performance ASIO driver for Windows
10 record and 10 playback channels per port
Sample rates of 44.1 kHz, 48 kHz and 96 kHz.
Dedicated Serato DJ iZotope USB FX inserts for each deck.
Software color coded silicone RGB back-lit pads.
Aux Channel for SP-6 routing.
High/Low-Pass sweep filters for Decks 1, 2 and Aux.
Rane’s proprietary non-contact magnetic faders.
If you want to know the key differences between Scratch Live to Serato DJ, check this article which compares the two: http://serato.com/scratchlive/compare
When you are ready to make the move, check this for things you need to know: http://serato.com/latest/blog/16989/things-to-know-scratch-live-to-serato-dj
Once you have made the transition to Serato DJ, this article will teach you how to use all of the new features such as sticker lock, slip, flip, iZotope fx & expansion packs, multi-fx mode, different display modes, eight cue points & more: http://serato.com/dj/tutorials
Categories: News/PR, Rane DJ & Products Tags: Rane, Serato DJ & TTM57MKII Posted On: January 22, 2015 Posted By: Ray Kiernan"
TTM57SL TTM 57 SL TTM57
Grading System
Excellent - Looks brand new, no scuffs, no scratches, no dents or dings
Very Good - Minor scuffs or scratches, no dents or dings
Good - Normal to heavy scuffing and scratching, a few dents or dings
Fair - Significant scuffing or scratching, several dents or dings
Poor - Extreme scuffing or scratching, extreme dents, dings