151 Paint White Gloss 300ml Non Drip Tin Interior/Exterior

About this item

White Gloss Non-Drip paint is a topcoat paint which adheres to both interior and exterior surfaces of materials such as wood, metal and concrete leaving a high gloss finish.
Directions: All surfaces should be clean and dry and free of dust, rust, oil and old loose paint. Where loose material is present, sand down with special sanding block or paper. Metal surfaces should be scraped, sanded and primed with an anti-corrosive paint. Using a clean soft brush simply apply a single coat to the surface to be painted.
Drying Time: Allow 8-10 hours for surface drying and 24 hours in normal conditions for paint to hard dry. If applying a second coat wait 24 hours.

151 Black Matt Non Drip Gloss 300 ml Tin Exterior / Interior

Topcoat paint which adheres to both interior and exterior. Ideal for surfaces such as metal, wood, concrete and can also be used for blackboards.

Allow 8-10hours for surface drying and 24 hours in normal conditions for paint to hard dry. Allow 24 hours if applying a second coat.

151 Radiator Enamel White Gloss Paint 300 ml Tin

Topcoat used to paint radiators and pipes. Heat resistant finish on household water filled radiators and pipes. It will provide a tough long lasting finish and will prevent rust.

The radiator should be clean and dry and free from rust, oil and old loose paint. Ensure the radiator is turned off when painting. Allow 8-10 hours for surface drying and 24 hours in normal conditions for paint to hard dry. If applying a second coat wait 24 hours.

WARNING:

Flammable liquid and vapour. May be fatal if swallowed and enters airways. Causes skin irritation. Toxic to aquatic life with long lasting effects.

Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No Smoking. Wash hands & exposed skin thoroughly after handling. Wear protective gloves.

IF SWALLOWED: Immediately call a POISON CENTER/doctor/NHS111. IF IN EYES: Rinse cautiously with water for several minutes.

Remove contact lenses, if present and easy to do. Continue rinsing. Store in a well-ventilated place. Keep container tightly closed. Avoid release to the environment. Dispose of contents/container to Local Authority regulations