Motul 105777 Gear Oil 300 75W90 Fully Synthetic Transmission Fluid - Two 1L Bottle

Part # 105777 x2

This sale is for a 2 x 1L bottle of Motul Gear 300 75W-90 Racing Gearbox and Differential lubricant.

100% synthetic lubricant for all mechanical transmission of high performances and racing cars. For synchronised or not synchronised gearboxes, gearbox/differential, transfer gearboxes and hypoid differentials without limited slip system operating under shocks, heavy loads and low revolution speed or moderate loads and high revolution speed. 0% shear loss: Unshearable oil film in extreme conditions. Very high lubricating power which decreases friction and wear. 90 grade at hot temperature to provide outstanding oil film resistance at hot temperature and/or to reduce transmission noise. Fluid at low temperature to allow comfortable gear shifting.

100% synthetic extreme pressure lubricant for an efficient anti wear protection, a better resistance at high temperature and a longer life time. 0% shear loss : Unshearable oil film in extreme conditions. Stays in 90 grade after KRL 20 hours shear test as requested by SAE J306 Standard, July 1998 update Very high lubricating power which decreases friction and wear. 90 grade at hot temperature to provide outstanding oil film resistance at hot temperature and/or to reduce transmission noise. Fluid at low temperature to allow easier gear shifting when the gearbox is cold. Less effort required on the gear lever to shift the gears. Suitable for any type of seal and yellow material used in gearboxes design. Anti-corrosion, Anti-foam.

This is our most popular gear oil, Motul's 75W90 Gear300 is 100% synthetic and Ester-based for maximum strength, protection and performance in the most demanding street and racing vehicles.

STANDARDS:
  • API GL4 and GL5 / MIL-L-2105D
  • Viscosity grade SAE J306 75W-90
  • Density at 15°C (59°F) ASTM D1298 0.900
  • Viscosity at 40°C (104°F) ASTM D445 72.6 mm²/s
  • Viscosity at 100°C (212°F) ASTM D445 15.2 mm²/s
  • Viscosity index VIE ASTM D2270 222
  • Flash point ASTM D92 200°C / 392°F
  • Pour point ASTM D97 -60°C / -76°F