eBay

EASILY INSTALL COIL SPRINGS: Use the ABN | Coil Compressor Tool to help you install coil springs and coil spring spacers; This car spring compressor tool compresses conventional coil springs for or removal from suspension
FITS YOUR RIDE: Safely compress “loose” coil springs (no shock in the middle of the spring) and the main coils between the upper/lower control arms on most vehicles and light trucks with an arm coil spring front suspension (If it has coil springs, this coil spring tool will work); Not intended for McPherson strut springs or shocks; We do not recommend using on coil springs with special coatings, as it may damage the coating and cause the spring to fail
EASY TO USE: Instructions not included; Insert this coil springs compressor through the center of the coil spring, engage the hooks with screw shaft centered so both hooks grip a coil towards top of spring, insert fork through lowest coil possible and make sure fork straddles the screw shaft and sits evenly on coil, ensure that the compressor washers are sitting in recessed area of fork, compress spring by slowly tightening screw shaft clockwise while ensuring hooks do not rotate on springs
BUILT TO LAST: Constructed from heavy-duty metal with a black-oxide finish for maximum strength and longevity that resists rust and corrosion; Between uses, we recommend cleaning and applying anti-seize compound lubrication to the screw shaft threads of this automotive spring compressor to prolong the life of the center screw; Not intended for use with impacts tools (damage to threads may occur)
EASY STORAGE: Heavy-duty 13” x 2.5” x 7.8” inch (33cm x 6.4cm x 19.8cm) plastic blow-molded carrying case with latches and built-in handle for easy transportation, safe storage, and quick organization

Product Description

About the ABN Coil Spring Compressor

Use the ABN | Coil Compressor Tool to help you install coil springs and coil spring spacers. This car spring compressor tool compresses conventional coil springs for or removal from suspension.

*Instruction manual not included with package.

(Read full operation instructions below.)

HOW TO USE

STEP 1

Remove the shock absorber and other hardware as required, then with the screw shaft centered, engage the hooks on a coil toward the top of the spring.

STEP 2

With the screw shaft threads fully engaged in the compressor body, insert the fork through the lowest coil possible so it straddles the screw shaft and sits evenly on the coil. Ensure that the compressor washers sit in the recessed area of the fork, then twist the fork around the coil of the spring as necessary to adjust.

STEP 3

Compress the spring by slowly tightening the screw shaft clockwise while ensuring the hooks do not turn on the spring.

TIPS

Do not over-compress a coil spring (the coils should never touch).
Do not continue to compress the spring once the compressor reaches its travel limit.

Who We Are

Auto Body Now is a family owned company based out of South Dakota. We have an exceptionally strong Internet presence, sending out over 50,000 products each month. In fact, if you have purchased any of your auto body supplies or car care supplies online, there is a good chance we have had the opportunity to serve you.