Satelec Acteon Newtron Fit Dental Scaling Tip Bone Surgery Extraction Sinus Lift
Model to Choose:
Compatible with- #1 Universal Tip,
- #1S Slim,
- #2 Voluminous Calculus,
- #3 Colorations,
- #10P Scaling Pockets,
- #10X Interproximal,
- #10Z Scaling Pockets,
- H3 for Anterior Teeth,
- H4L Left Angled,
- H4R Right Angled,
- TK1-1S Short Probe,
- TK1-1L Long Probe,
- TK2-1L Left-angled,
- TK2-1R Right-angled,
- V-BS1,
- V-BS4,
- V-BS2L,
- V-BS2R,
- V-BS5,
- V-BS6,
- V-SL1,
- V-SL2,
- V-SL3,
- V-SL4,
- V-SL5,
- LC1,
- LC1/90,
- LC2,
- LC2L,
- LC2R
- Acteon Satelec Piezotome 2.
- Acteon Satelec Piezotome Solo (LED).
- Acteon Satelec Piezotome Cube.
- Acteon Implantcenter 2.
Scaling
Fit: For Satelec Acteon Scaler
Function:
#1 Universal Tip :
- Treating simple cases and gross supra-gingival scaling.
- Tangential orientation to the surface.
- To-and-fro sweeping to "detach" the tartar whilst respecting the enamel.
- Supra- and subgingival scaling, shallow pockets debridement.
- It's more active lateral edges make it suitable for scaling the interproximal spaces.
- Finer and longer than tip No.1, it is also powerful and robust.
- For removing voluminous supragingival deposits.
- Apply the flat part to the tooth surfaces.
- For removing discolorations and stains.
- The tip is used by applying the rounded extremity to the surface to be treated.
- Scaling pockets < 2-3mm.Supra-gingival scaling for children and shallow pockets scaling.
#10X Interproximal:
#10Z Scaling Pockets: - Interproximal spaces scaling thanks to its anatomic shape.
- With its flat active part, it is particularly suitable for the interproximal spaces and supra-gingival scaling.
- Its anatomical shape allow fast and efficient procedure.
- Scaling pockets < 4mm. Biofi lm and soft deposit removal.Pockets depth measurement with the graduations.
- This tip is efficient for maintenance treatment in patients with good dental hygiene.
Periodontics
Fit: For Satelec Acteon Scaler
Function:
H3 for Anterior Teeth:
- Ideal tip to begin with, for the treatment of anterior teeth. The guiding edge is used parallel to the pocket.
- The H3 tip is descended into the periodontal pocket without risk of injury to the ligament. The cavitation will lift the debris out.
- Left angled. Recommended for the treatment of all surfaces and furcations:
-Maxillary: vestibular and distal surfaces of sector 2, pivote at 13 then palatal and mesial surfaces of sector 1.
-Mandibular: lingual and mesial surfaces of sector 3, pivote at 43 then vestibular and distal surfaces of sector 4.
- Right angled. Follows the H4L tip in the treatment sequence for the treatment of all surfaces and furcations:
- Maxillary: palatal and mesial surfaces of sector 2, pivote at 13 then vestibular and distal surfaces of sector 1.
- Mandibular: vestibular and distal surfaces of sector 3, pivote at 43 then lingual and mesial surfaces of sector 4.
Periomaintenance
Fit: For Satelec Acteon Scaler
Function:
TK1-1S Short Probe:
- Micro-tip recommended for examining shallow to moderate pockets (<4mm) and for the maintenance of simple cases.
- Micro-tip for examining and maintenance of moderate to deep pockets (>4mm).
- It is a diagnosis aid during the debridement and irrigation of pockets.
- The TK1 probe tips are used without pressure following the contour of the pockets and skimming over the root surface.
- Premolars and molars. Left-angled.
- Recommended for maintenance of moderate to deep pockets and furcations.
- - maxillary: vestibular and distal surfaces of sector 2, pivote at 13 then palatal and mesial surfaces of sector 1.
- - mandibular: lingual and mesial surfaces of sector 3, pivote at 43 then vestibular and distal surfaces of sector 4.
- Premolars and molars. Right-angled.
- Complements the TK2-1L tip. Mini-tip used to treat moderate to deep pockets and furcations.
- - maxillary: palatal and mesial surfaces of sector 2, pivote at 13 then vestibular and distal surfaces of sector 1.
- - mandibular: vestibular and distal surfaces of sector 3, pivote at 43 then lingual and mesial surfaces of sector 4.
Essential Kit (BS1,BS4,LC2,SL1,SL2,SL3)
Simply essential.
This kit is a selection of the most popular tips from SATELEC, an Acteon group company® surgical kits.
These 6 tips can be used in all of the following procedures:
- Osteotomy, osteoplasty (BS1 and BS4 tips)
- Extractions (LC2 tip)
- Sinus Elevation by the lateral approach (SL1, SL2 and SL3 tips)
Due to the ultrasonic frequency modulation, a selective cut is achieved in surgical mode. Therefore, these tips limit the risk of soft tissue injury such as gingiva, ligaments, periodontal fibers and nerves. The sterile spray helps to cool the tips.
- V-BS1：Saw intended for cutting of cortical bone in surgical orthodontics, pre-implant surgery,and bone distraction.
- V-BS4: Circular scalpel angled at 130°, for osteoplasty and harvesting of bone particles or chips. Ridge osteoplasty, periodontal surgery, cysts exerisis, etc.
- V-LC2：The particularly slim LC2 allows access to the tight spaces between the root and the alveolar bone without risk of damaging cortical bone. Length of active part: 10mm
- V-SL1: Diamond-coated tip for vestibular bone window cut and for attenuation of sharp angles.
- V-SL2: Diamond- coated ball tip for smoothing the vestibular bone window and precise osteoplasty. Ball diameter: 1.5mm. Laser mark every 2mm.
- V-SL3: Plateau-tip, non- cutting, for sinus membrane elevation on the vestibular bone window’s edges.Plateau diameter: 5 mm.
Bone Surgery Kit (BS1,BS2L,BS2R,BS5,BS4,BS6)
Thinness and security.
Bone Surgery™ (BS) tips, principally intended for performing bone grafts, allows cutting, excising and remodeling of bone structures without the risk of soft tissue lesions.
Comprising six ultrasonic tips (three saws and three scalpels) adapted to the different cases that arise in the intraoral environment, the BS Kit is used for dental clinical treatments such as bone harvesting, crest expansion, preparation of the implant site and accessing the lower alveolar nerve.
The sterile spray helps to cool the tips (thus avoiding tissue damage from exposure to high temperatures) and provides excellent visibility of the operating field.
These tips guarantee a fine, clean and effortless cut.
- V-BS1：Saw intended for cutting of cortical bone in surgical orthodontics, pre-implant surgery,and bone distraction.
- V-BS2L: Bone saw with four teeth, used for cutting the ramus cortical bone. Left oriented, it is used to create vertical and horizontal osteotomy lines on the patient’s right mandible.
- V-BS2R: Bone saw with four teeth, used for cutting the ramus cortical bone. Right oriented, it is used to create vertical and horizontal osteotomy lines on the patient’s left mandible.
- V-BS5: Flat scalpel, for fine osteotomies. Ridge expansion, thin osteotomy, distraction, preparation of buccal bone flap on thick cortical bone prior to sinus lift surgery.
- V-BS4: Circular scalpel angled at 130°, for osteoplasty and harvesting of bone particles or chips. Ridge osteoplasty, periodontal surgery, cysts exerisis, etc.
- V-BS6: Curved scalpel particularly effective for substantial osseous reshaping. This tip is used to perform osteoplasties and reshaping of the bone not assuring the tooth support. It can also be used to mark a prosthetic reference point on enamel, if needed, where osteoplasty will begin.
Sinus Lift Kit (SL1,SL2,SL3,SL4,SL5)
For unmatched visibility.
The Sinus Lift Kit offers the practitioner a straightforward and safe answer to the lateral sinus lift operation. Thanks to the ultrasonic frequency modulation, the risk of membrane damage is limited.
The diamond-coated tips for window cutting and the three spatula tips for sinus lift SL1 and SL2 are cooled by the sterile spray (thus avoiding tissue damage from exposure to high temperatures). The use of a manual instrument is recommended to control the membrane detachment.
Moreover, the cavitation effect enables excellent visibility of the operating field.
These tips guarantee a fine, clean and effortless cut.
- V-SL1: Diamond-coated tip for vestibular bone window cut and for attenuation of sharp angles.
- V-SL2: Diamond- coated ball tip for smoothing the vestibular bone window and precise osteoplasty. Ball diameter: 1.5mm. Laser mark every 2mm.
- V-SL3: Plateau-tip, non- cutting, for sinus membrane elevation on the vestibular bone window’s edges.Plateau diameter: 5 mm.
- V-SL4: Non-cutting spatula, oriented at 90°, for sinus membrane elevation inside the sinus.Spatula diameter: 4 mm.
- V-SL5: Non-cutting spatula, oriented at 135°, used for sinus membrane elevation inside the sinus and for disengagement of anatomical structures.Spatula diameter: 4 mm.
Extraction Kit (LC1,LC1/90,LC2L,LC2R,LC2)
For atraumatic extractions without bone destruction.
This kit is intended for clinical procedures such as extraction of wisdom teeth, fractured roots, impacted teeth and root section. The five ultrasonic tips are each adapted to the anatomical context (reduced visibility and space) of anterior and posterior areas.
Inserted between the cementum and the periodontal ligament of the tooth, the tips will widen the ligamental space. Once separated from its attachment system, the tooth can be removed rapidly and with a less traumatic luxation. The alveolar bone edge can be kept intact; an alveolectomy is therefore avoided.
Usage guidelines recommendations:
- The tip must be activated before its insertion into the periodontal space.
- The tip must be placed parallel to the root.
- Perform a to-and-fro movement towards the apex.
- It is important not to exert a lever effect with the tips.
- LC1: To be inserted deeply and with great care, along the periodontal ligament, between the root and the alveolar bone.Length of active part: 9mm
- LC1/90: To be inserted deeply and with great care, along the periodontal ligament, between the root and the alveolar bone. Length of active part: 9mm.
- LC2：The particularly slim LC2 allows access to the tight spaces between the root and the alveolar bone without risk of damaging cortical bone. Length of active part: 10mm
- LC2L: Oriented at 45° to the left or to the right, the LC2L/LC2R facilitates access to the posterior areas. The tip’s slimness respects the morphology of cortical bone and offers working comfort in the sectors with reduced visibility.Length of active part: 10mm
- LC2R: Oriented at 45° to the left or to the right, the LC2L/LC2R facilitates access to the posterior areas. The tip’s slimness respects the morphology of cortical bone and offers working comfort in the sectors with reduced visibility.Length of active part: 10mm
FDA Statement
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.
Seller's name: October-dent20210
City State: Zhengzhou, Henan China
Telephone number：+86371-61770155
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.
Seller's name: October-dent20210
City State: Zhengzhou, Henan China
Telephone number：+86371-61770155
