Product characteristics

• support Optical Power Meter
• support Visual Fault Locator
• supporting RJ45 testing
• support lighting
• Support USB charging
  
• support automatic shutdown
• support backlight switch
• support wavelength memory
• support user calibration
• supporting SC/FC/ST/LC interface（LC interface is optional）
• supporting simultaneous display of linear mW and non-linear index dBm
• supporting external power supply such as charging treasure,computer.etc.

Specification

OPM

• Wavelength Range:800~1700nm
• Connector:FC/SC/ST/LC universal interface（LC interface is optional）
• Detector Type:InGaAs
• Power Test Range: -70~+6dBm
• Uncertainty:±5％
• Standard Wavelength:850/980/1300/1310/1490/1550/1625/1650nm
• Display Resolution:Linear display:0.1%,Logarithmic display:0.01dBm

VFL

• Wavelength:650nm±30nm
• Output Power:2mw (Distance 3mi)
• Model:CW/1Hz/2Hz
• Connector:SC/FC/ST/LC 2.5MM Universaljoint（LC interface is optional）

Others

• RJ45 Cable Sequence(standard):Test Distance 300m
• Battery: 700mAH Li-ion battery
• Battery Duration:≥72h(OPM)
• Auto matic Shutdown Time:10min
• Working Temperature:-10℃~+50℃
• Storage Temperature:-40℃~+70℃
• Dimension:112*66*30mm
• Netweight:150g

 

Product list

• 1x Optical Power Meter
• 1x RJ45 module
• 1x User Manual
• 1x USB charging cable

 

 

Key function: 
LIGHTkey:
turns on/off the backlight:Press the "LIGHT" button to switch the backlight.
turns on/off VFL LIGHT: Long press the "Light" button to turn on VFL, then press 1Hz to blink, then press 2Hz to blink, then press again to turn off VFL,
Warning! Do not look directly at red light to avoid damage to your eyes.

dB key:
Press the "dB" button to realize the relative power test (insertion loss test) or absolute power test. After entering the relative power test mode, the insertion loss (dB) will be displayed at the bottom of the screen, and the reference value will be displayed in the second line of the screen.
Hold the "dB" key for 3 seconds to turn RJ45 test mode on or off.

REF key:
Press the "REF" button to set the current optical power as the reference value and enter the relative power test (insertion loss test) mode. The second line of the display will show the reference value set, and the third line will show the relative power value (insertion loss dB).

λ key:
Wavelength switching function: multiple wavelength switching, ordinal 850nm,980nm,1300nm,1310nm,1490nm, 1550nm,1625nm,1650nm,shut down automatically save the last test using wavelength.

LED key:
LED lighting function: press "LED" to turn on and off LED lighting. 

 

User calibration mode

Press "LED"+"LIGHT" to enter the user calibration mode:
1st power key: Save
LIGHT key:+0.05dB
dB key:-0.05dB
λ key:Wavelength switching

RESET
Press the "LED"+"REF" key at the same time, and the full screen will show that the recovery is successful.