Product characteristics:

• support Optical Power testing
• support Visual Fault Locator
• supporting RJ45 testing
• support lighting
• support automatic shutdown
• support backlight switch
• support wavelength memory
• support user calibration
• supporting SC/FC/ST interface
• supporting simultaneous display of linear mW and non-linear index dBm
• supporting external power supply such as charging treasure,computer.etc.

 

Specification:

OPM

WavelengthRange:800~1700nm

Connector:FC/SC/ST 2.5MM universal interface

DetectorType:InGaAs

PowerTestRange: 70~+3dBm /-70~+10dBm /-50~+26dBm

Uncertainty:±5％

StandardWavelength:850/980/1270/1300/1310/1490/1550/1625nm

DisplayResolution:Lineardisplay:0.1%,Logarithmicdisplay:0.01dBm

RecognizableFrequency:0Hz、270Hz、1kHz、2kHz

 

VFL

Wavelength:650nm

Output Power:5mw/10mw/30mw

Model:CW/1Hz/2Hz

Connector:SC/FC/ST 2.5MM universal interface

 

Others

RJ45 Cable Sequence(standard):Test Distance 300m

Battery:1100mAH Li-ion Battery

Charge port:MicroUSB

Battery Duration:≥72h(OPM)

Auto matic Shutdown Time:10min

Working Temperature:-10℃~+50℃

Storage Temperature:-40℃~+70℃

Dimension:115*71*30mm

Weight:145g

 

Product list:

1x Optical Power Meter

1x USB charging cable

1x User Manual

 

 

 

Key function:

UNIT key

UNIT switching function: Press "Unit" to switch units (nw db dbm).

Calibration mode function: Long press "UNIT" for 2 seconds to enter the user calibration mode, and the display screen "CAL" displays. At this time, short press "λ" key +0.05dbm, short press "VFL" key -0.05dbm, short press "UNIT" key to switch different wavelengths for calibration. After the user completes the calibration, long press the button again to save and exit the calibration mode, and "CAL" is extinguished.

"λ" key

Wavelength switching function: short press the "lambda", wavelength switching, multiple wavelength switching, ordinal 850 nm, 980 nm, 1300 nm, 1310 nm, 1490 nm, 1550 nm, 1625 nm, shut down automatically save the last test using wavelength.

Automatic shutdown function: Long press "λ" for 2 seconds to turn off the automatic shutdown function, and the "Power" icon on the screen should be off. Power saving mode is enabled by default, and the machine will be shut down automatically without operation for 10 minutes.

Forced shutdown function: In case of abnormal operation, long press "λ" for 5 seconds, the machine is forced to shut down and press any key to wake up.

 

dB key

Light decay reset function: press "dB" to quickly calibrate and clear the light decay db value to avoid errors caused by measurement results.

 

VFL key

Red state switch: Short press "VFL", 650 red light flashes a constant light, cycle switch.

Red light brightness switch: Long press "VFL" for 2 seconds to enter 650 red light gear adjustment mode. The third row of the display displays the current red light gear. At this time, short press the key to cycle switch gears 1, 2 and 3, which are weak, medium and strong respectively. Long press the button again to exit the red gear adjustment mode, and the machine will automatically save the current red gear.

 

REF key

Data storage function: long press "REF" for 2 seconds, power meter light decay data storage function, display "EEO1" automatic coverage cycle storage, the machine can store data to EE40.

 

LED key

LED lighting function: press "LED" to turn on and off LED lighting.

 

REF+LED key

Data viewing function: Long press the "REF+LED" combination key for 2 seconds to enter or exit, and store the data viewing mode. The display screen "nm" is off to display, the "λ" key stores data upturning, and the "VFL" key stores data downturning.