Touch Sensor/ Hand Sweep/ Motion Sensor LED Lamp ON/OFF Control Senor Switch Kit
2. High-quality infrared pair of tubes, anti-strong light interference, induction range hand sweep on the light, and then sweep off the light.
3. People come to light, people leave the induction range after 30 seconds automatically turn off the light, can achieve no operation intelligent induction.
4. Good electrical conductivity, low heat generation, stable signal transmission, small chalking rate of copper wire.
5. Anti-black panel interference, responsive, long life, stable and reliable.
Touch Sensor (sub-control)
Model: YK-CM001
Input voltage: DC 3.7-24V
Controllable load: ≤5A
Installation mode: embedded (17mm opening)
Dimmer function: Yes
Opening size: φ17mm*L10
Note: The program identification judgment time of single and double click is 0.3 seconds
Control mode: click, control the main light (long press induction dimming), double click, control the blue light
Model: YK-CMCX002
Input voltage: DC 12-24V
Maximum load: depends on the power supply power used in the supporting
Installation mode: embedded (17mm opening)
Dimmer function: Yes
Opening size: φ17mm*L10
Note: The judgment time for program identification of click and double click is 0.3 seconds, and the bottom of the switch is an unpluggable terminal, which is easy to arrange and
replacement
Model: YK-RTCX001
Input voltage: DC 12-24V
Installation mode: open/embedded (12mm opening)
Controllable load: ≤5A
Sensing distance: 1-3CM
Induction delay time: 30s
Sensing angle: 120°
Opening size: φ12mm*L11
Maximum load: 12V60W/24V100W
Note: People come to light up, people leave the induction range after 30 seconds automatically turn off the lights, can realize no operation intelligent induction.
Model: YK-RTCX002
Controllable load: with power supply power
Input voltage: DC 12-24V
Installation mode: open/embedded (opening 12mm)
Sensing distance: 1-3CM
Induction delay time: 30s
Sensing angle: 120°
Opening size: φ12mm*L11
Features: sensor head can be removed
Induction delay: people come to light, 30 seconds after the person left the light off
Light mode: that light is off
Note: Please use the special Hengle power supply with 3p set control port
Model: YK-SSCX001
Controllable load: ≤5A
Port: DuPont male
Input voltage: DC 12-24V
Working load: 12V/60W 24V/100W
Sensing distance: 5-8CM
Opening size: φ10mm*L10
Induction mode: hand sweep light on
Installation mode: open installation + concealed installation
Features: the sensor head can be removed
Model: YK-SSCX002
Installation mode: open/embedded (10mm opening)
Input voltage: DC 12-24V
Working load: Power supply power
Port: HY/3P male
Sensing distance: 5-8CM
Opening size: φ10mm*L10
Induction type: that is bright that is extinguished
Opening depth: 25mm
Induction mode: hand sweep light on, then sweep light off
Installation mode: open installation + concealed installation
Features: sensor head can be removed
Model: YK-SSCX001
Controllable load: ≤5A
Input voltage: DC 12-24V
Port: DuPont male
Working load: 12V/60W 24V/100W
Induction mode: Open the door light on, close the door light off
Induction type: light on and off
Opening size: φ10mm*L10 Opening depth: 25mm
Installation mode: open installation + concealed installation induction head can be removed
Model: YK-SSCX002
Port: HY/3P male
Controllable load: with power supply power
Input voltage: DC 12-24V
Installation mode: open/embedded (10mm opening)
Sensing distance: 5-8CM
Opening size: φ10mm*L10 Opening depth: 25mm
Induction mode: open the door light on, close the door light off
Special features: the sensor head can be removed
Model: YK-SSCX001
Controllable load: ≤5A
Input voltage: DC 12-24V
Working load: 12V/60W 24V/100W
Sensing distance: 5-8CM
Opening size: φ10mm*L10 Opening depth: 25mm
Induction type: instant light is off
Induction mode: open the door light on, close the door light off
Special features: induction head can be removed
Model: YK-SSCX002
Port: HY/3P male
Controllable load: with power supply power
Installation mode: open/embedded (opening 10mm)
Input voltage: DC 12-24V
Sensing distance: 5-8CM
Induction type: that light is extinguished
Induction mode: open the door light on, close the door light off
Opening size: φ10mm*L10
Special features: the induction head can be removed
1 x Sensor Switch
1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3.All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.
1.We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.
2.Please DON'T leave negative or neutral feedback if you haven't received item in 30 days, because we have mentioned the shipping time repeatedly.
1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.
2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.
3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.
1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.
3. Please include your eBay ID and item number with any email requests.
1. If you have any questions, please feel free to email our service specialists.
2.Just contact us using the " Ask the seller a question" link on eBay.
3.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.
2. High-quality infrared pair of tubes, anti-strong light interference, induction range hand sweep on the light, and then sweep off the light.
3. People come to light, people leave the induction range after 30 seconds automatically turn off the light, can achieve no operation intelligent induction.
4. Good electrical conductivity, low heat generation, stable signal transmission, small chalking rate of copper wire.
5. Anti-black panel interference, responsive, long life, stable and reliable.
Touch Sensor (sub-control)
Model: YK-CM001
Input voltage: DC 3.7-24V
Controllable load: ≤5A
Installation mode: embedded (17mm opening)
Dimmer function: Yes
Opening size: φ17mm*L10
Note: The program identification judgment time of single and double click is 0.3 seconds
Control mode: click, control the main light (long press induction dimming), double click, control the blue light
Model: YK-CMCX002
Input voltage: DC 12-24V
Maximum load: depends on the power supply power used in the supporting
Installation mode: embedded (17mm opening)
Dimmer function: Yes
Opening size: φ17mm*L10
Note: The judgment time for program identification of click and double click is 0.3 seconds, and the bottom of the switch is an unpluggable terminal, which is easy to arrange and
replacement
Model: YK-RTCX001
Input voltage: DC 12-24V
Installation mode: open/embedded (12mm opening)
Controllable load: ≤5A
Sensing distance: 1-3CM
Induction delay time: 30s
Sensing angle: 120°
Opening size: φ12mm*L11
Maximum load: 12V60W/24V100W
Note: People come to light up, people leave the induction range after 30 seconds automatically turn off the lights, can realize no operation intelligent induction.
Model: YK-RTCX002
Controllable load: with power supply power
Input voltage: DC 12-24V
Installation mode: open/embedded (opening 12mm)
Sensing distance: 1-3CM
Induction delay time: 30s
Sensing angle: 120°
Opening size: φ12mm*L11
Features: sensor head can be removed
Induction delay: people come to light, 30 seconds after the person left the light off
Light mode: that light is off
Note: Please use the special Hengle power supply with 3p set control port
Model: YK-SSCX001
Controllable load: ≤5A
Port: DuPont male
Input voltage: DC 12-24V
Working load: 12V/60W 24V/100W
Sensing distance: 5-8CM
Opening size: φ10mm*L10
Induction mode: hand sweep light on
Installation mode: open installation + concealed installation
Features: the sensor head can be removed
Model: YK-SSCX002
Installation mode: open/embedded (10mm opening)
Input voltage: DC 12-24V
Working load: Power supply power
Port: HY/3P male
Sensing distance: 5-8CM
Opening size: φ10mm*L10
Induction type: that is bright that is extinguished
Opening depth: 25mm
Induction mode: hand sweep light on, then sweep light off
Installation mode: open installation + concealed installation
Features: sensor head can be removed
Model: YK-SSCX001
Controllable load: ≤5A
Input voltage: DC 12-24V
Port: DuPont male
Working load: 12V/60W 24V/100W
Induction mode: Open the door light on, close the door light off
Induction type: light on and off
Opening size: φ10mm*L10 Opening depth: 25mm
Installation mode: open installation + concealed installation induction head can be removed
Model: YK-SSCX002
Port: HY/3P male
Controllable load: with power supply power
Input voltage: DC 12-24V
Installation mode: open/embedded (10mm opening)
Sensing distance: 5-8CM
Opening size: φ10mm*L10 Opening depth: 25mm
Induction mode: open the door light on, close the door light off
Special features: the sensor head can be removed
Model: YK-SSCX001
Controllable load: ≤5A
Input voltage: DC 12-24V
Working load: 12V/60W 24V/100W
Sensing distance: 5-8CM
Opening size: φ10mm*L10 Opening depth: 25mm
Induction type: instant light is off
Induction mode: open the door light on, close the door light off
Special features: induction head can be removed
Model: YK-SSCX002
Port: HY/3P male
Controllable load: with power supply power
Installation mode: open/embedded (opening 10mm)
Input voltage: DC 12-24V
Sensing distance: 5-8CM
Induction type: that light is extinguished
Induction mode: open the door light on, close the door light off
Opening size: φ10mm*L10
Special features: the induction head can be removed
1 x Sensor Switch
1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3.All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.
1.We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.
2.Please DON'T leave negative or neutral feedback if you haven't received item in 30 days, because we have mentioned the shipping time repeatedly.
1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.
2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.
3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.
1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.
3. Please include your eBay ID and item number with any email requests.
1. If you have any questions, please feel free to email our service specialists.
2.Just contact us using the " Ask the seller a question" link on eBay.
3.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.
Am 26.06.2023 hat der Verkäufer die folgenden Angaben hinzugefügt: