50g Polishing Powder Tool Car Windscreen Glass Polishing Cleaning Accessories

50g Polishing Powder Tool Car Windscreen Glass Polishing Cleaning AccessoriesCERIUM OXIDE IS MADE FOR GLASS POLISHING NOT FOR REMOVING SCRATCHES, BUT AS PART OF A POLISHING PROCESS IT CAN BE USED FOR THIS PURPOSE.

HOW TO REMOVE SCRATCHES FROM GLASS

1)  FULLY REMOVE THE GLASS SURFACE TO THE BASE LEVEL OF THE SCRATCH USING AN ABRASIVE PROCESS, SILICON CARBIDE, ALUMINIUM OXIDE OR DIAMOND ABRASIVES, ONCE A SMOOTH FINISH HAS BEEN ACHIEVED, FINAL GRIT SIZE USUALLY A MINIMUM QUALITY OF 1000-1500 GRIT, THEN CERIUM OXIDE CAN BE USED TO POLISH THE GLASS SURFACE BACK TO A SHINE.

OR

2)  FOR BLEMISHES,  SCUFFS AND VERY! FINE SCRATCHES OF LESS THAN 45 MICRONS DEPTH IT IS USUALLY POSSIBLE TO VERY SLOWLY POLISH AWAY A THIN LAYER OF THE GLASS SURFACE USING ONLY CERIUM OXIDE, ON A FELT BOB OR POLISHING PAD ATTACHED TO A POWER TOOL, AS A ROUGH GUIDE IF YOU CAN FEEL THE SCRATCH WITH YOUR FINGERNAIL IT IS PROBABLY TOO DEEP TO REMOVE WITH ONLY CERIUM OXIDE. SO PLEASE CHECK THE SUITABILITY OF THE SCRATCHES BEFORE ATTEMPTING TO REMOVE THEM,THIS METHOD CAN TAKE A LOT OT TIME AND HARD WORK.   TOUGHENED GLASS LIKE WINDSCREENS IS VERY HARD GLASS AND MORE DIFFICULT TO WORK ON,  DOMESTIC GLASS AND ORNAMENTS TEND TO BE SOFTER AND EASIER TO WORK ON. AS AN ESTIMATE IF NO IMPROVEMENT IS SEEN WITHIN 1 HOUR OF POLISHING, ON A SMALL SCRATCH, THEN IT CAN'T BE REMOVED WITH THIS METHOD AND WILL NEED TO BE REMOVED WITH ABRASIVES AS DESCRIBED IN THE FIRST SECTION ABOVE.

IN MOST CASES FOR GLASS POLISHING YOU WILL NEED TO USE POLISHING EQUIPMENT, FELT PADS OR BOBS, A POWER TOOL, SPECIALIST KNOWLEDGE AND SKILLS MAY ALSO BE REQUIRED, SO PLEASE ASK A PROFESSSIONAL FOR ADVICE IF NEEDED BEFORE BUYING THIS ITEM. YOUTUBE ALSO HAS MANY VIDEOS ON GLASS POLISHING THAT MAY BE OF HELP

 CERIUM OXIDE IS NORMALLY USED ON A FELT PAD OR BOB ATTACHED TO A POWER TOOL, NOT BY HAND!

50g CERIUM OXIDE POLISHING POWDER 99% PURE,  IDEAL FOR GENERAL USE, ON MOST TYPES OF STANDARD DOMESTIC GLASS,CERIUM OXIDE IS MIXED WITH WATER AND IS APPLIED ON A HARD FLAT FELT POLISHING PAD OR BOB ATTACHED TO AN ELECTRIC DRILL 2000 RPM MAX, IT'S THEN USED TO POLISH AWAY A THIN LAYER OF THE GLASS SURFACE TO RESTORE THE SHINE AND WITH FURTHER EFFORTS  VERY FINE SCRATCHES CAN BE SLOWLY REMOVED,CERIUM OXIDE IS NOT SUITABLE FOR REMOVING DEEP SCRATCHES, NO FURTHER INSTRUCTIONS ARE INCLUDED  WITH THE ITEM, PLEASE DON'T HESITATE TO ASK IF YOU HAVE A QUESTION.

COLOR OF PRODUCT MY VARY DEPENDING ON THE PRODUCER.

ALL TECHNICAL SPECIFICATIONS AND USES ARE THE SAME

DESPITE COLOR OF THE PRODUCT.

- We accept the payment through Payoneer only.

- Payment must be fulfilled within 7 days after the end of auction.

- Please make sure your Payoneer and ebay address is correct. Or not, please correct it before payment.

- If you are a big customer, Please contact with us about the item's PRICE and SHIPPING.

- Your feedback & suggestion is deeply appreciated, thanks. 

All orders will be shipped out during our handling time after receiving payment.
Please provide right detail address (include house number,Street name) to us in order to you ship the order to you as soon as possible!
If you want ship the items by other way, please feel free to contact us. Thanks
1.You have 7 days to contact us and 30 days to return it from the date it was received. If this item is in your possession more than 7 days,it is considered used and WE WILL NOT ISSUE YOU A REFUND OR REPLACEMENT. There are NO EXCEPTIONS!
2. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your eBay ID.
3. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included,AFTER BOTH Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
4. Return shipping is to be paid by the Buyer.
High quality product quality is our aim. Satisfying you is our happiest job. Therefore, we will try our best to provide you with the best products and services according to your requirements and deliver them on time. If we do not make enough improvements or need improvement, please send us an email suggestion. If you like our products and services, please provide us with positive feedback in advance so that we have more confidence and more opportunities to serve more client.

1. We greatly appreciate your POSITIVE feedback.

2. Negative or Neutral feedback does not resolve any underlying issues that you may be experiencing as a buyer.
 
3. Any question or unsatisfaction please contact us with ebay message, we will sincerely solve for you.

Our Working Time is (GMT+8): 8:00AM -- 5:00PM (Monday to Friday) 

PushAuction
ibay365