Edge Finder Milling Machining Optical With Beep Led Digital Edge Finder
Accuracy of detection: 0.003mm
Suitable for machine tools: traditional machine
Type of battey: 23A12V (L1028.a23s 12v)
tools and integrated machine tools
Suitable penetration rate: 400-600rpm
Optoelectronic edge finder
Question 1:Why won't the light be on after installing the battery? Is it broken?
In order to save energy and use for a long time, after installing the battery, the photoelectric dividing rod is still in the power state,
The correct way to use the photoelectric center bar is to install the battery after the machine
The bed will ring and turn on the light only after contacting the metal workpiece (note: the spindle does not need to rotate)
Question2: Can the photoelectric divider be used in water?
No, you can't.Photoelectric center bar is electronic products, is not waterproof and oil - proof.
Note for use of photoelectric edge finder
(1) Before using edge finder, ensure that the two right-angled edges of the workpiece are parallel to the X axis and Y axis respectively.
(2) When using photoelectric edge finder, do not open the spindle motor to avoid damage.
(3) Photoelectric edge finder is the use of photoelectric principle, the workpiece must be an electric conductor, otherwise it can not be used. At the same time, the loop is formed through the spindle, the bed, the workpiece, so the bottom of the workpiece can not have insulating objects.
(4) Keep the edge finder and the workpiece clean, without metal debris or burr attachment, so as not to make the indicator light when there is no contact with the workpiece, and get the wrong result.
(5) When moving from the work-piece side to the other side, the edge finder should be lifted to avoid damaging the edge finder in the movement.
(6) When fast contact with the workpiece, pay attention to the minimum step size close to the workpiece, so as to improve the accuracy.
(7) Because there is radial runout in the steel ball part of the edge finder, we adopt the method of measuring the edge and rotating the edge finder 180° to measure the other edge to eliminate the error (ensure that the same point of the edge finder is used to contact the workpiece). When measuring one side, measure once, rotate half circle, measure again, add the two results divided by 2, likewise, eliminate the error caused by jumping. Note that when rotating, do not hold the edge finder by hand for rotation, but hold the card head for rotation.
Turn, but hold the head of the card to spin.
(8) After the experiment, according to the standard method to find the center of the workpiece, the error is within 0.02mm, looking for the workpiece edge coordinates can achieve the same precision.
Package includes:
1*Electronic Edge Finder
1*Box
Notes:
1. Due to the difference between different monitors, the picture may not reflect the actual color of the item.
Please allow slight dimension difference due to different manual measurement.
3.Don't open the dispute ,pls ,any questions ,feel free to contact with our customer service ,we can slove your problems .
* Please make payment asap, then we can arrange shipment for you asap
* Item will be sent within 1-2 days of payment verification.
* We appreciate your patience and allow sufficient time for delivery. Please feel free to contact us if you don't receive your package ！
* We will carefully test every item before shipment.The quality is guaranteed!
* Any questions, please contact us via eBay message, In our working hours will be resumed within 48 hours.
* If you are satisfied with our service, please kindly leave us a positive feedback and give us the Detailed Seller Rating with all "5 stars" in very area.
* Our aim is to provide Top Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy.
* We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help. Thanks!
* You can contact us through email ，We will reply you as soon as possible ！
