9" Android 12 Car Stereo Radio For Toyota Corolla 2009-2012 GPS Navi Wifi BT CAM
 

System Configuration

· CPU: AutoChips AC8227L APSoc, Quad-core ARM Cortex-A7, up to 1.3GHz

·RAM: 2G

· ROM: 32G

· Operating System: Android 12 Hardware Configuration

· Screen: 9 inch

· Display specification: HD

· Display resolution: 1024*600

· Touch Screen: Capacitive touch screen

· USB: Support 2 USB, Maximum capacity 32GB

· TF Card: not support

· Amplifier IC: TDA7388 High fidelity car amplifier, 4*45W

· Microphone:high-sensitivity low-noise,clear phone call

 

Package Included:
1 x Car Android GPS multimedia player
2 XUSB cables
1 XGPS antenna
1 x RCA cable
1x power cord
1X rear camera
1X rear camera cables
 
 
 
 
corolla-1 corolla-2
 
 
 
 

Tips:
1. Why can't turn on the car radio ?
1.1 Please check the Voltage of car radio:12V
1.2 When you test this car radio,you can combine the red and yellow wires and connect them to the positive side of the power supply.Black line to negative power supply.
1.3 Replace the same type of insurance to test the car radio.
Note: Please must use our power cables to connect our car radio,it is not possible to insert the original car plug directly into our machine.

2. Why the car radio will show "No Signal" when we reversing?
Please check if the camera's line is properly connected to the car radio.
Note: The video port of rear camera must insert the "CAMIN" port of car radio.

3. Why does the camera display "!" and "Can't watch video while driving" when I use USB to watch videos?
Please turn off the "Video Warning" function in the settings,then will be OK.

4. Why can't search FM?
4.1: No radio antenna inserted;
4.2: Please check if the radio antenna is plugged in. Please insert more antennas several times to make it well contacted;
4.3: The signal of your location is not good. Please go to a better place to test again
4.4: The radio antenna on the car is broken/no effect; please replace the radio antenna and test again.

5. Why can't connect the Bluetooth of car radio?
5.1: Open the phone settings interface, open the Bluetooth in the Bluetooth function, search for Bluetooth devices, find the player's Bluetooth model to be paired; if you need a pairing code, enter 0000; if not, try 1234 or 123456.
5.2: Please try to use another mobile phone to test this function.
All methods are correct and still cannot use Bluetooth, Please unplug the plug on the back of the player and plug it in after 3 minutes.

PushAuction