eBay

·【Rated Capacity】 1 Ton (2200 LBS) with lift range 6.1 inch to 17.3 inch.
·【Built-in Safety Valve】 Equipped with self-locking structure, jack can keep current height even out of power by accident.
·【Power Supply】 Powered by cigarette lighter or car battery. 11.5 ft cord will be long enough to reach all 4 tires of the car or SUV.
·【Easy to Operate】 Only 2 switches on the panel to operate---a vertical lift control switch and a LED light switch. Press lift control switch to make the electric jack lift up and down. Build-in flashlight helps you see more clearly under the car.
·【Portable Jack】 This hydraulic jack is space-saving for its small size. So it can definitely be the perfect company as a roadside emergency jack along your car journey.

Product Description

1.Jack couldn't work

Check whether turning on the auto power
The pilot lamp for the cigarette lighter plug is on or not ,if it is destroyed,please replace it,the try again
Whether the plug for the power cable of jack is loosen with the jack or falling off

2.The pressure rod couldn't be risen

Confirm whether starting the motor
Check the direction switch for up/down
Check whether the lowest temperature is within the rang of suitable temperature for this product,if not please preheating the jack ,macking the hydraulic oil thaw
Not using for long time maybe cause the oil is not smooth,please first up switch for starting one minute,the press down switch

Technical Details:

1 ton Electric hydraulic floor jack with LED light
Cross groove saddle prevent slipping from vehicle
Rotating threaded rod can be spin out up to 75mm, makes cross groove saddle closer to lifting point
Small size for easy storage
Unique design, a good gift for your friend

Specification:
Input Voltage: 12VDC
Current: 13A
Fuse: 15A
Max Loading: 2200 lb (1000 kg)
Lifting Height Range: 6.1 in. -17.3 in.
Power Cord Length: 11.5 ft. (3.5m)
Working Temperature: 5℉ ~122℉（-15℃~+50℃）
Jack Size: 11 in. * 5 in. * 5.3 in.
Weight: 9.37 lb(4.25kg)
Packing Size: 13.6"*6.2"*7.7"
Weight: 10.1 lb(4.6kg)
Packing List:
Electric Hydraulic Jack * 1
Instruction Manual * 1
Six-angle Spanner * 1
Fuse * 2

Note 1:

Stop the vehicle, put it in parking, and apply the brake firmly.
Please confirm that each function switch is off. Then plug the power plug into the car cigarette lighter.

Note 2:

Remove the safety valve screw with hex wrench and rotate it clockwise, please remove the car lift till it descends to its original position. Then tighten the safety valve tightly and tighten the dustproof plug.

Note 3:

In case of the power has been disconnected, self-locking power structure and safety unloading knob prevent jack from falling and will not come down immediately. When re-connecting the power, car jack will go on working in accordance with the instruction, or using the safety valve manually to fall.