Volkswagen (NEW STYLE QUADLOCK) Steering Wheel Control CAN Interface adapter cable

Interface to retain the use of the steering wheel controls in various Volkswagen vehicles including Amarok, Beetle, Caddy and Transporter T6 (WITH NEW STYLE QUADLOCK)

Compatible with following vehicles:

Car Make / Model	Year	Remarks
Volkswagen Amarok	2018 - 2022
Volkswagen Beetle	2011 - 2019	A5
Volkswagen Caddy	2016 - 2020	(3rd Gen Facelift 2.0)
Volkswagen Jetta	2010 - 2018	VI
Volkswagen Passat	2008 - 2017	CC
Volkswagen Scirocco	2008 - 2017
Volkswagen Sharan	2010 - 2022	II
Volkswagen Tiguan	2008 - 2016
Volkswagen Touran	2015 onward	II
Volkswagen Transporter	2015 - 2019	T6
Volkswagen Transporter	2019 Onwards	T6.1
Volksagen UP!	2012 onward

This is a new style Quadlock connector used on select VW vehicles. This can be identified by the 2 larger pins In the corner of the connector

DOES NOT RETAIN ANY MULTIFUNCTION DISPLAY INFORMATION. PLEASE USE ONE OF OUR DISPLAY RETENTION FITTING KITS (FK-699-T6-DMX02, FK-699-T6-ILX) TO ACHIEVE THIS

This interface retains the use of the steering wheel audio controls with a new aftermarket radio including the use of the telephone buttons, answer call, reject call and voice command/Siri (depending on head unit compatibility).

This interface provides CANbus ignition to the new radio and speed pulse, reverse gear and handbrake CANbus outputs.
This adapter will not affect the original parking sensors however it will not display the visual imaging from the original display.

What's Included

• 49-VW-05 Steering Control Adaptor
• Stereo Patch Lead

Works with the following brands

• Alpine
• Clarion
• JVC
• Kenwood
• Pioneer
• Sony

FOR CHINA UNITS YOU WILL NEED 49-000

Patch lead INCLUDED  for the steering controls depending on the make of radio being fitted.

Radio Being Fitted	Part Number	Short Description
Chinese/ Unbranded	49-000	Patch lead for 49- Series Steering wheel control for Resistive Programming, Chinese, Xtrons, Pumpkin, Joying or unbranded stereo.
Alpine	49-001	Patch lead for 49- series steering wheel control for Alpine stereo.
Clarion	49-003	Patch lead for 49- series steering wheel control for Clarion stereo.
JVC	49-004SW	Patch lead for 49- series steering wheel control for JVC stereo.
Kenwood	49-005	Patch lead for 49- series steering wheel control for Kenwood stereo.
Pioneer	49-007	Patch lead for 49- series steering wheel control for Pioneer stereo.
Sony	49-008	Patch lead for 49- series steering wheel control for Sony stereo.
Zenec	49-011	Patch lead for 49- series steering wheel control for Zenec stereo.
Universal	49-025	Self pinning (instructions included) patch lead for 49- series steering wheel control for Alpine, Clarion, JVC, Kenwood, Pioneer or Sony stereo.

Please note this is a new style Quadlock connector used on select VW vehicles. This can be identified by the 2 pins on the bottom left of the connector.

Technical Note

• CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS. 
• SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.

IMPORTANT NOTE: Please make sure that is the correct Stalk Adaptor for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.

If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.