![]() |
![]() ![]() |
![]() ![]() |
![]() ![]() |
![]() ![]() |
![]() ![]() |
![]() ![]() |
![]() ![]() |
![]() ![]() |
![]() ![]() |
![]() ![]() |
Note
Orders from the USA will all be shipped out via our US warehouse.
If you order from outside of US the product will be shipped from China.
EM282-R
EM282-R is designed to locate leaks in pressure and vacuum systems.
It can be used to detect and locate the source of the ultrasonic emission generated by gas or liquid flowing through a small restrictive opening.
It uses the advanced ultrasonic sensing technique and features small size, light weight, reliable detection, easy use and utility.
In conjunction with EM282-T Ultrasonic Transmitter, EM282-R can also be used for tightness check in sealed compartments such as container, tank, car, etc.
EM282-T
EM282-T can send out ultrasonic sound of 40kHz and is designed to be used in conjunction with EM282-R.
Non-pressurized vessels or containers cannot generate ultrasonic sounds. Tightness check for them (also cars, ships, etc.) can be performed by using EM282-R and EM282-T together.
To do it, turn on EM282-T and place it inside the compartment to be checked.
The ultrasonic sound emitted by EM282-T will pass through orifice or faulty seal and will be quickly located by EM282-R.
Principle
Turbulence created by gas or air forced through a small orifice generates ultrasonic sound.
Ultrasonic sound occur when the atmosphere leaks into a vacuum vessel or when a pressure vessel leaks to the outside atmosphere.
Ultrasonic sound's frequency is related to the size of the orifice which ultrasonic sound passes through, but usually the frequency is about 40kHz.
Ultrasonic sound is very directional, this directionality is used to pinpoint the origin of the ultrasonic sound, the leak point.
Operation Mode
EM282-R can be used in one the two modes, one is Active Mode, another is Passive Mode.
In the Passive Mode, only EM282-R is used.
Passive Mode can be detect and locate leaks in pressure and vacuum systems.
These leaks can generate ultrasonic emission which can be detected by EM282-R.
In the areas where leaking gases are not pressurized or not sufficiently pressurized, there is no ultrasonic sound for detection.
In this situation, you can use Active Mode to detect and locate leak.
In Active Mode, EM282-R is used in conjuction with EM282-T.
EM282-T is an ultrasonic transmitter which can send out ultrasonic sound.
By placing EM282-T in sealed area, and scanning the extorior of this area with EM282-R, the ultrasonic sound escaping from the sealed area will be detected.
A flaw in the seal can quickly and accurately be located and pinpointed.
General Specification
Type: Ultrasonic Wave Leak Detector
Alarm Indication: The LEAK LED lights and the Ticking Tone increases in frequency
Frequency Response: 40kHz ± 2kHz
Operating Condition: 0°C-40°C, <80%RH
Battery: 9V, 6F22 or equivalent
Size: 192*50*30mm(Receiver) / 101*59*28mm(Transmitter)
Weight: about 115g(Receiver) / 90g(Transmitter)
Item Specifics | |
---|---|
Items Included | Carrying Case |
Year Manufactured | 2020 |
MPN | EM282 |
Features | Mechanical |
Brand | all-sun |
Type | Leak Detector |
Detection | Chlorofluorocarbons (CFC) |
Material | Plastic |
Color | White |
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
1.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2.Items will be shipped within 1-3 business day when we received payment.
3.Delivery time depends on destination and other factors;
4.International buyers please note:
a.Import duties, taxes and charges are not included in the item price or shipping charges. These charges are buyer’s responsibility. We will try our best to reduce the risk of the custom duties.
b.Please check with your country's customs office to determine what these additional costs will be prior to buying.
Please feel free to contact us via eBay or e-Mail if you have any question. We will reply within 24 hours in working day.
Shop Category |
allsun Christmas Light Tester Non Contact Voltage Tester,50 Pieces Mini Christmas 2.5 Volt 0.17 mas,0.43 watt Replacement Light Bulbs for Xmas Tree Decorative,Light Bulb&Fuse Detector 12-600 VacProduct DescriptionAbout this item
How to install battery? & How to Replace a Mini Light Bulb?How to install battery? Before you taking a test with Christmas Light Tester, please kindly open the battery door and take out the insulating strip, then battery also needs to be installed well again(Please kindly be reinstalled according to the positive and negative poles). Thanks! Battery replacement If the LED dose not flash when the built-in buzzer sounds,the button cells are low and should be replaced immediately. To replace the button cells,set the function switch to the "OFF" position first,then press and slide the pocket clip&battery cover out. Replace the exhausted button celles with two new 1.5V LR44 button cells according to the polarity indication.Reinstall the pocket clip&battery cover. How to Replace a Mini Light Bulb? Step 1: Keep the set unplugged at first. Take out the broken light with its base, keep the base and remove the broken light bulb. Step 2: Check that the two wires of the new bulb are properly positioned on either side of the base. Step 3: Spread the wires and go down the sides, try to keep them centered left and right that help make a cleaner and nice contact in the set.
Step 4: Reinsert the light and make sure it’s pushed in completely.Plug the set back in to see if you are successful.
Christmas Light Tester Warming tips of Replacement bulbsThis Christmas Light Tester allows you to easily These replacement bulbs are designed without find any burned out bulbs on your Christmas being tapered slotted or pinched at the bulbs' lights.You can locate it to your Christmas light bottoms, 2 wires only; When you replace the string problem.It can test bulbs, fuses, and the bulb, you must be careful to make sure the light strand. It incorporates a bulb remover wire do not cross when you put back into the which you can use to remove bulbs from base, if the wire is crossed, it could cause them Christmas light set easily. to short and "burn" out.
Notes Specifications:Double check the wattage (or amperes) AC Voltage Detection Range: 12V - 600V required for your light set to see if it fits these Frequency: 50 - 60Hz light bulbs before purchasing.To avoid short Operation Temperature: 0-40 ℃ circuit, never let the 2 wires touch.Keep away Relative Humidity: <85% from children and store them carefully. Application Type: Indoor Use. DIY decoration & Christmas Light Tester
The mini Halloween lights can be connected together, you can use them to decorate your Halloween tree, flower bouquets, tables; Can also be applied as pretty decorations for Halloween gifts. Multi-color designAre these bulbs incandescent bulbs or led's------These Bulbs are Incandescent bulbs. Multi-color design: mini modeling surface, warm light. The lighting effect can bring a comfortable atmosphere to any scene. These multi-color replacement bulbs are suitable for indoor and outdoor use as Halloween Christmas lights, wonderful to decorate yo Note Due to rules of some shipping courier,parcels may not include batteries,otherwise it will not get through the custom. Power Supplied by 2 pieces 1.5V LR44 button cells.
All rights reserved. |