Product Details
HC-SR501 Improved version
Product Feature:
RCWL-9196 integrates a 30V withstand low dropout LDO, the new module can work in the range of 3-30V
Amplify the part and discard cheap electrolytic capacitors and use ceramic chip capacitors, which have longer module life and better performance
The power supply adopts anti-reverse connection protection, which is safer to use
The sensor part adopts dual-unit high-performance pyroelectric probe
Professional processing chip RCWL-9196, the module has high sensitivity and high withstand voltage
RCWL-9196 integrates a 30V withstand low dropout LDO, the new module can work in the range of 3-30V
Amplify the part and discard cheap electrolytic capacitors and use ceramic chip capacitors, which have longer module life and better performance
The power supply adopts anti-reverse connection protection, which is safer to use
The sensor part adopts dual-unit high-performance pyroelectric probe
Professional processing chip RCWL-9196, the module has high sensitivity and high withstand voltage
Main features
Adopt professional demodulation chip RCWL-9196
Working voltage: 3-30V
Working current: 60μA
5-10M typical maximum distance
The power supply adopts anti-reverse connection protection
Adopt professional demodulation chip RCWL-9196
Working voltage: 3-30V
Working current: 60μA
5-10M typical maximum distance
The power supply adopts anti-reverse connection protection
Sensitivity adjustment:
The variable resistor for sensitivity adjustment is factory set in the middle, the sensitivity is the middle value, and the general sensing distance is 5-8 meters. The variable resistance is rotated to the far right, and the sensitivity is the highest, which can reach 8-10 meters. The variable resistance is rotated to the far left, and the sensitivity is the lowest, which can reach 3-5 meters.
Time adjustment:
The variable resistor for time adjustment is factory set on the far left, and the delay after induction is the shortest, generally 2S. The variable resistor is rotated to the far right, and the time is the longest, about 200S.
There is an initialization time when the module is powered on, which is proportional to the setting time. Please refer to the
The variable resistor for sensitivity adjustment is factory set in the middle, the sensitivity is the middle value, and the general sensing distance is 5-8 meters. The variable resistance is rotated to the far right, and the sensitivity is the highest, which can reach 8-10 meters. The variable resistance is rotated to the far left, and the sensitivity is the lowest, which can reach 3-5 meters.
Time adjustment:
The variable resistor for time adjustment is factory set on the far left, and the delay after induction is the shortest, generally 2S. The variable resistor is rotated to the far right, and the time is the longest, about 200S.
There is an initialization time when the module is powered on, which is proportional to the setting time. Please refer to the
application note for details.
typical application
Induction lamps
Human detection
security
Induction lamps
Human detection
security
Application Note
1: Module default settings
The default delay time of the module is 2S, and the blocking time is 2S. The sensing distance is about 5 meters (room temperature is 25°C, and the human body is moving).
2: Power-on reset
When the module is powered on, there will be a reset process (power-on > output high level > output low level > work). The reset time is about 2-3 times of the delay time and blocking time. The module works normally after about 10-15S under default conditions. If the delay time is set to 30S, the module will work after about 1 minute.
3: Photosensitive control
(Optional, not set at the factory) Photosensitive control can be set, and it will not sense when the light is strong during the day.
4: Temperature compensation
(Optional, not set at the factory) In summer, when the ambient temperature rises above 30°C, the detection distance will be shortened, and temperature compensation can be used to compensate for certain performance.
1: Module default settings
The default delay time of the module is 2S, and the blocking time is 2S. The sensing distance is about 5 meters (room temperature is 25°C, and the human body is moving).
2: Power-on reset
When the module is powered on, there will be a reset process (power-on > output high level > output low level > work). The reset time is about 2-3 times of the delay time and blocking time. The module works normally after about 10-15S under default conditions. If the delay time is set to 30S, the module will work after about 1 minute.
3: Photosensitive control
(Optional, not set at the factory) Photosensitive control can be set, and it will not sense when the light is strong during the day.
4: Temperature compensation
(Optional, not set at the factory) In summer, when the ambient temperature rises above 30°C, the detection distance will be shortened, and temperature compensation can be used to compensate for certain performance.
Shipping list:
Human body induction switch module X1
Human body induction switch module X1
HC-SR501
Description :
Product Type: HC--SR501 Body Sensor Module
Operating voltage range: DC 4.5-20V
Quiescent Current: <50uA
Level output: High 3.3 V /Low 0V
Trigger: L can not be repeated trigger/H can be repeated trigger(Default repeated trigger)
Delay time: 5-200S(adjustable) the range is (0.xx second to tens of second)
Block time: 2.5S(default)Can be made a range(0.xx to tens of seconds
Board Dimensions: 32mm*24mm
Angle Sensor: <100 ° cone angle
Operation Temp: -15-+70 degrees
Lens size sensor: Diameter:23mm(Default)
Features:
Product Type: HC--SR501 Body Sensor Module
Operating voltage range: DC 4.5-20V
Quiescent Current: <50uA
Level output: High 3.3 V /Low 0V
Trigger: L can not be repeated trigger/H can be repeated trigger(Default repeated trigger)
Delay time: 5-200S(adjustable) the range is (0.xx second to tens of second)
Block time: 2.5S(default)Can be made a range(0.xx to tens of seconds
Board Dimensions: 32mm*24mm
Angle Sensor: <100 ° cone angle
Operation Temp: -15-+70 degrees
Lens size sensor: Diameter:23mm(Default)
Features:
1, the automatic sensor: to enter the sensor output range is high, people leave the sensor range of the automatic delay off high, output low.
2,the photosensitive control (optional, factory is not set) may set the photosensitive control during the day or light intensity without induction.
3, the temperature compensation (optional, factory is not set): In the summer when the ambient temperature rises to 30 ~ 32 ℃, slightly shorter detection range, temperature compensation can be used as a performance compensation.
4, two trigger mode: (can be selected by jumpers) a, can not repeat the trigger: the sensor output high, the delay time is over, the output will automatically become low from high; b, repeatable trigger: the sensor output high after the delay period, if the human body in its sensing range activities, its output will remain high until after the delay will be left high to low (sensor module review Measured activities of each body will be automatically extended after a delay time, and the final event of the delay time Starting point of time).
5, with induction blocking time (the default setting: 2.5S block time): sensor module, after each sensor output (high change Into a low level),you can set up a blockade followed by time period, in this time period the sensor does not accept any sensor signal. This feature can have a "sensor output time" and "blocking time" the interval between the work produced can be applied to detect the interval Products; also inhibit this function during load switching for a variety of interference. (This time can be set at zero seconds - Tens of seconds).
6, the working voltage range: the default voltage DC4.5V-20V.
7, micro-power consumption: static current "50 microamps, especially for battery-powered automatic control products.
8, the output high level signals: types of circuits can be easily and docking.
Instructions:
1. Sensing module for about a minute after power initialization time, during the interval to the output module 0-3 times a minute in standby mode.
2. Should avoid direct lighting such as interference sources close the surface of the lens module so as to avoid the introduction of interference signal generator malfunction; use of the environment to avoid the flow of the wind, the wind sensor will also cause interference.
3. Sensor module using a dual probe, the probe's window is rectangular, dual (A per B million) in the direction of the ends of long, when the body passed from left to right or right to left when the reach the dual IR time, distance difference, the greater the difference, more sensitive sensors, when the body from the front to the probe or from top to bottom or from bottom to top direction passing, dual IR not detected changes in the distance, no difference value, the sensor insensitive or does not work; so the sensors should be installed dual direction of the probe with human activities as much as possible parallel to the direction of maximum to ensure that the body has been passed by the dual sensor probe. To increase the sensing range of angles, the module using a circular lens, the probe also makes sense on all four sides, but still higher than the upper and lower left and right direction of sensing range, sensitivity and strong, still as far as possible by the above installation requirements.VCC, trig (control side), echo (receiving end), GND
4. Dimensions and Adjustment: Note: The potentiometer clockwise to adjust the distance, sensing range increases (about 7 meters), on the contrary, sensing range decreases (about 3 meters).Delay adjustment potentiometer clockwise rotation, sensor delay longer (about 300S), the other hand, induction by the short delay (about 5S).
5. Applications a, Security Products b, the human body sensors toys c, the human body sensor lighting d, industrial automation and control, etc. It can automatically and quickly open various types of incandescent, fluorescent lamps, buzzer, automatic doors, electric fans,automatic washing machine and dryer Machines and other devices,is a hightech products. Especially suitable for enterprises, hotels, shopping malls, warehouses and family aisles, corridors and other sensitive Sense of region, or for the security zone automatic lighting, lighting and alarm systems.
Package list :
1PCS Motion Sensor Detector
- EBAY Managed Payment. But we only Accept your Ebay Address, please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
1. We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2. Orders will be processed instantly and dispatched within 1-3 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3. All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please keep in touch with us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.