Product Features:
This module uses two high-quality LED digital tube manufacturing, high brightness, and can display the current and voltage at the same time
The module uses the original imported microcontroller, and a lot of data processing in the software, so that the display is accurate and stable
The module has excellent technology, and the volume is super small.
The module has reverse connection protection, even if the reverse connection will not damage the module
This module can be used for car, electric car battery current and voltage monitoring
Basic properties:
Module name: current and voltage display module
Refresh speed: about 200MS once
Measurement range: 10A/50A/100A (current)
Operating current: less than 10MA
Storage temperature: -10℃ to +65℃
Measurement accuracy: 0.1%
Display mode: double four-bit 0.28 digital tube
Measurement range: 0V-100V (voltage) minimum display 0.1V
The current meter's power supply side and the measurement side of the ground using a common ground design, that is, the ground of the power supply and the ground of the test side are connected, so the current meter's test side can only be strung after the appliance (i.e., between the negative pole of the equipment under test and the negative pole of the power supply of the equipment under test)
1. It is recommended that the power supply side of the meter head use a separate isolated power supply
2. Before use, the shunt must be connected to the circuit, and then connected to the digital current meter head, to prevent high voltage damage to the meter head
Note: 50A / 100A need to match the shunt to measure the current
Package list:
10A/50A/100A Voltage ammeter* 1
Connection cable* 2
50A/100A Shunt* 1
(10A don't have shunt)