How to solder
1).Determine the right temperature for your project. Which temperature to use depends on the materials you're joining and the kind of solder you're using.
2).Once your iron is heated to the appropriate temperature, pick up the iron by the handle in one hand and hold a piece of solder in the other hand. Hold the hot iron to the place where the two metal components will meet for about a second to heat them up. You want to heat the metal parts, not the solder itself.
3).Touch the solder to the heated components. As the solder melts, it will flow into the gaps it needs to fill. Continue to feed in solder until a sufficient amount is melted. While you need enough to form a solid connection, you don't want to have too much solder either.
4).Allow the solder to cool on its own without any action.
5).Check the soldering joint for quality. A good connection will appear smooth, uniform and shiny. Make sure that aren't any problematic gaps between the components or globs of excess solder.
Package Included:
Soldering Iron x 1
Tin suction device x 1
Table Pen x 1
Multimeter x 1
Connection cable black x 10
Connection cable red x 10
Soldering Iron Tips x 5
50g Soldering Wire x 1
Soldering Iron Stand x 1
Tweezers x 2
Mini Wire Cutter x 1
Clean Ball x 1
Carry Bag x 1
Soldering Tips and Techniques :
1. Please always be careful when using these tools and check the safety tips when working with soldering iron and related activities
2. Please select a suitable temperature when soldering
3. Lower down the temp or turn off the soldering iron when not to be used for longer periods of time (do not let it be idle) to avoid damage to the iron and tips.
4. If something unusual happens with the product and if you are not familiar in fixing it, unplug it and do not do anything and contact seller for assistance)