Daly BMS 8S 24V 15A 20A 30A 40A 50A 60A 80A For LiFePO4 lithium Battery Pack
Model: DL8S (3.2V Rated LiFePO4 not for 3.7V rated Li-ION Battery)
common Version : common port for charge/discharge
Highlight:For
the same model, its charge current is less than discharge current
because Daly PCBAs were updated to well protect customer battery. Any
request, Please contact us.
Overview
◆DL8S24V15A/20A/30A/40A/50A/60A PCB is used for 8 series 24V battery pack.
◆We can design it for various lithium batteries like LiFepo4, LiMn2O4, and Li-polymer etc.
◆The
main functions are: over charge protection, over discharge protection,
over current protection, short-circuit protection, temperature
protection etc.
◆According to the customer request we can develop PCM in different sizes and structures.
◆BMS manufactured by high quality Mos and IC imported . Keep your battery long cycle serivce life time.
2. Advantage
◆Use top quality (A-level) protective integrated circuit IC, from the solution of Seiko
◆Strong
load ability, constant discharge current 15A/20A/30A/40A/50A/60A, use
high voltage resistance, low inner resistance power Mosfet. The heat
sink will greatly help cooling.
◆IC itself has power balancing function. The circuit is simple and reliable.
◆Typical
voltage detection for each cell. So each battery will be prevented over
charged or over discharged. Over current and short circuit protection
function is very reliable.Long time short circuit of the load won’t
affect the PCB and the battery.Temperature protection during charging
and discharging.
◆Extreme low power consumption. The consumption of the whole device is less than 50uA.
◆PCB use high anti-corrosion, high water resistance, high impedance ESD conformal Coating.
Package includes:
1*DALY 60A Lifepo4 BMS
1*Cable
FAQ
Q: How do I know what material OR type my battery is ?
A:
Please look the battery body,if the normal voltage of your battery
shows 3.2V,the battery is LiFePo4.If the normal voltage of your battery
shows 3.6V or 3.7V, the battery is Li-ion or Li-polymer battery, You can
also ask battery manufacturer for the material of battery.
Q: Is this BMS suit for my battery?
A: This BMS suit your battery or not depends on below 2 points:
How many series you cell is in your battery pack? The BMS you buy must be same series as your battery pack.
What
material your battery is? Only the LiFePo4 battery has different
electric parameter from other battery, so if you need buy the BMS for
LiFePo4, Please let us know firstly.
Q: What is the Common port and Separate port? what is the difference?
A: We take 13S 48V16A BMS as example:
Common
port 16A means your charge cathode and discharge cathode are connected
in the same point end (our P-), charge cathode and discharge cathode
are used in the common connection port, so the charge current and
discharge current are same as 16A.
Separate port is separately
connected by charge cathode (our C-) and discharge cathode (our P-), so
the charge current and discharge current are different, discharge
current is 16A, charge current is 8A.
Q: What is the balance function?Do we need cell balance or not?
A: The working principle and function are as followings:
When
your one cell voltage was reached balance voltage(Li-ion 4.18V, LifePo4
3.6V), that cell balance start work, balance resistance starts
discharge with 35mA, that cell was in both charging and discharging
status, and other cells were not reached balance voltage(Li-ion 4.18V,
Life Po43.6V), so they are only in charging status, when the fast cell
voltage was reached overcharge voltage (Li-ion 4.25V, Life Po4
3.75V),BMS starts off power protection, all the cells are stop charging,
this process will enable your battery charging in balance current, and
your battery voltage are in balance status.
However, if your cell
voltage difference are in a big range, The equilibrium effect is almost
zero,The solution is to replace cells with large voltage gaps.
Q: The relationship between battery capacity(AH or mAH) and BMS current(A)?
A:There
is no direct relationship between battery capacity and BMS current, big
capacity doesn't mean big current, but rely on continue current, that
is to say if your engine is powerful, you should choose high current of
BMS, it is not relied on battery capacity.
Q: What type of charger should i choose?
A:
Lithium battery must choose specific charger, don't use charger for
leadacid battery, for leadacid charger may have MOS with high pressure
breakdown protection, which will not protect of BMS over charge. LiFePo4
battery charger voltage = number of battery strings X 3.6V, while
Li-ion battery charger voltage = number of battery strings X 4.2V.
Q: What current BMS should I choose ?
A: Take 10S 36V as example:
What
current BMS you choose is depend on your E-bicycle motor power and
current limitation of controller,eg.16A for 350W and below, 25A for 500W
and below, 35A for 800W and below, 60A for 1000W and below, over 1200W
are contact with our service specialist for suggestion, continue
current shall be higher than current limitation in controller.
Q: How to contact for BMS?
A: Please send messages at below or E-mail us and we are always glad to help you with BMS