The following filaments are 100% neatly wound --

PLA/PLA+/PLA Meta/PETG /SILK PLA+ (ABS/TPU/PLA Marble is not included.)
Filament Printing tempe Print speed Traction (KGF) Melting point Elongation at break Net weight Tolerance Length
PLA 200-230℃ 50-100mm/s 11-16 7-9g/10min
(190 ℃, 2,16 kg)		 4% 1kg/Roll ±0.02MM 330M
PLA+ 210-235℃ 50-100mm/s

9-12
4-8g/10min
(190℃,2.16kg)
 45%
1.1kg/Roll
±0.02MM 330M
PLA Meta 180-200℃ 50-100mm/s

9-12

8-10g/10min
(190℃,2.16kg)
 35%
1.1kg/Roll
±0.02MM 330M
PETG 220-250℃ 50-100mm/s 8-14
6-11g/10min
(220℃,2.16kg)
 210% 1.1kg/Roll ±0.02MM 320M
SILK 200-230℃ 30-60mm/s 6-8
4-8g/10min
(190℃,2.16kg)
 200% 1.1kg/Roll ±0.02MM 330M
TPU 185-215℃ 20-40mm/s /
5-8g/10min
(190℃,2.16kg)
 600% 0.5kg/Roll ±0.02MM 165M
ABS 230-270℃ 50-100mm/s  6-11
12-19g/10min
(220℃,10kg)
25% 0.65kg/Roll ±0.02MM /
About this product:
【JAYO Filament 1.75mm】JAYO 3D printed fine filament uses advanced production technology to deliver an incredible 3D printing experience. Clean lines, precise dimensionality, low shrinkage and excellent adhesion make printing easier.
 
【Neatly wound filaments】JAYO's leading production process - neatly threaded filaments prevent filaments from tangling, twisting or breaking during printing, reducing the risk of clogging and greatly increasing print success.
 
【High dimensional accuracy and consistency】JAYO 3D printer filament diameter is 1.75 mm, and the dimensional accuracy is +/- 0.02 mm, which is almost suitable for FDM 3D printers.
 
【No clogging and no air bubbles】JAYO 1.75mm filament has better flowability and effectively reduces clogging when printing. Plastic vacuum packaging and desiccant make the filament less susceptible to moisture.
 
【High Compatibility & Easy Operation】Compatible with 99% of FDM 3D printers and 3D pens on the market. JAYO fine filament's excellent stability is suitable for beginners and advanced users.

How to store:
1.If you leave your printer idle for more than a few days, please retract the filament to protect your printer nozzle.
2.In order to extend the life of your filament, please put the unsealed filament back into the original vacuum bag and store in a cool and dry place after printing.
3.When storing your filament, please pass the loose end through the holes on the edge of the filament spool to avoid coiling, so that it will be fed properly for the next use.
PushAuction