• 【Type】: Electric Motor
• 【Material】: Metal
  
• 【Power supply】: The starting current should be above 10A, and it is 【recommended to use a DC power supply such as a switch power supply or a battery.
  
• 【Operating voltage】: DC12V-24V
  
• 【Rated no-load current】: 1.1A
  
• 【Torque】: 6.KG/cm
  -- 795 (circular shaft, double output shaft) no-load speed: 11000-1200 rpm at 12V
  -- 795 (D-axis model 24V) no-load speed: 12V6000 rpm, 24V12000 rpm
  
• 【Step height】: 4.5mm
  
• 【Step diameter】: 17.5mm
  
• 【Motor diameter】: 42mm
  
• 【Motor length (excluding shaft)】: 70.5mm
  
• 【Output shaft length】: 16mm (both front and rear of the dual output shaft model are circular shafts, with a length of 16mm)
  
• 【Shaft diameter】: 5mm
  
• 【Tail step height】: approximately 4.5mm
  
• 【Tail shaft length】: approximately 3mm
  
• 【Installation hole spacing】: approximately 29mm, similar to 775, with the bracket connected
  
• 【Installation hole diameter】: M4 screws
  
• 【Motor weight】: 370g
  
• 【Features】: Both front and rear are ball bearings, with high speed and strong strength. The 795 double ball bearing has high rotating speed of 11000-12000 revolutions, large torque, low noise, long service life, and its own Computer fan, making it a good choice for electric tools and equipment.
  
• 【Application】: Suitable for making electric model toys, bench drills, electric grinders, small lathes, equipment, etc. Compared to the 775, the body axis has increased by 4mm, but the torque has increased by about 30, which is still very good.

• 【Note】】: 1.The product dimensions are all measured by hand, and there are tolerances in the dimensions. 2. Due to different photographic products, the actual color may have color difference, which is subject to the actual object.

Packing Quantity】:

• According to your choice.