3/4" IG IBC container S60 + 1/2" double tap

With these IBC adapters, various combinations such as a ball valve, outlet valve or connector can be connected.

Most of the IBC containers on the market have an outlet tap with an S60x6 coarse thread or also known as DN 50 or NW50, DIN61 or S60. The outer diameter (measured with thread) is approx. 60 mm and is often given as 2 inches. The coarse thread is clearly visible with a thread pitch of 6 mm.

Contents:

2-way 1/2" double outlet valve with plug and hose nozzle

Wall connection 1/2 (approx. 19mm) inch external thread

Thread outlet tap connection 3/4 (approx. 26mm) inch external thread

Middle outlet 3/4 (approx. 26mm) inch external thread

Passage about 10mm

1 x plug-in system connection suitable for Gardena

1 x hose nozzle (16mm)

Hot-pressed brass, nickel-plated

Brass double nipple reduced IT x AG 1/2" x 3/4"

Our brass fittings in industrial quality are made from material according to drinking water regulation 50930-6, are hot-pressed and have a thread according to DIN EN ISO 228-1.

High-quality design for installation in various areas in the heating and installation area as well as in cold and hot water pipes and heating systems.

Suitable for installers, DIY enthusiasts and do-it-yourselfers.

Black IBC nut with internal thread S60 x 3/4" IT

Nut with a coarse S60 internal thread suitable for the IBC container and a passage with a 3/4" internal thread.

With this IBC adapter, various combinations such as a ball valve, outlet valve or connector can be connected.

60mm coarse thread and 26mm (3/4") fine thread inside.

Details:

S60 nut thread

internal seal for the IBC connection

3/4" through female thread

plastic

Item will be delivered in parts!