4K@60Hz HDMI 2.0b Audio Extractor Splitter Supports 2CH/5.1CH/7.1CH Audio
Features:
l One HDMI input converted to one HDMI video + one HDMI 7.1CH audio+Audio(SPDIF+3.5mm)output
l Output audio support: HDMI 7.1CH+SPDIF+3.5mm analog Audio Output
l Input Resolution: up to 2160p60
l HDMI to achieve the synchronization of audio signal separation. There are 2.0CH / 5.1CH/7.1CH three kinds of audio mode options
l LED indication: when source or sink is working, LED relative to is light
l No loss of quality
l Installs in minutes
l Need DC5V power supply
l Support ARC
Specification:
l Material: Aluminum Case
l Size: 8.2x6x2.2cm
l HDMI Resolution: 2160P/1080P/1080I/720P/576P/576I/480P
l Audio Output: L/R+SPDIF
l Max Baud Rate: 18Gbps
l Input/Output TMDS Signal: 0.5~1.5Volts P-P(TTL)
l Input/Output DDC Signal: 5Volts P-P (TTL)
l Input Cable Distance: ≤15m AWG26 HDMI Standard Cable
l Output Cable Distance: ≤20m AWG26 HDMI Standard Cable
l Max Working Current: 500mA
l Operating Temperature Range: (-15 to+55℃)
l Operating Humidity Range: 5 to 90%RH (No Condensation)
Package:
l 1x HDMII Cable, 1x USB, 1x User Manual
Note:
l Pls use the machine as the instruction listed to keep the long use lifetime of the machine
l The machine should be placed at the spot far from the Damp, High-Temperature, Dusty, Erosive, and oxidative environment
l All parts will be free from the strong shake, hit, fall
l Touching the power adaptor with the wet hands is prohibited
l Pls hold the power adaptor head and do not pull the power cord when cut off from the socket
l Pls turn the power off when the machine is not used for long time
l Pls do not open the cover and do not touch the inside parts
l Pls use the original factory power adaptor
l When you use ARC Function, please make sure the spdif port light is red on, that’s means the converter get signal. And the TV need support ARC
l When you open the ARC, then the TV remote will can’t control the volume, you can only adjust the volume on your speaker/sounder/home theater
l Please do not plug HD TV to HDMI input of converter otherwise you could not get any signal.