Product Description

HAKRC 2130 4-in-1 ESC Datasheet

Features:

1. PCB adopts high-end 6-layer 2oZ thickened copper skin, which has stronger overcurrent capability and good heat dissipation.

2. MOS adopts imported 40V high current resistance MOS, long life with strong load capacity.

3. Adopt industrial grade LDO, high temperature resistance.

4. Using high-quality Japanese Murata capacitors, strong filtering performance

Size: 40*41mm (30.5mm-30.5mm mounting hole)

Packing size: ø64*64*35mm

Product net weight: 12.5g

Package weight: 51.5g 


ESC parameters:

ESC firmware: BLHeli-S 16.7

Protocol support: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600

Input voltage: 2S-8S Lipo

Galvanometer ratio: 160

Continuous current: 50A

Peak current: 60A

High quality hardware:

Japan imported MOS, three-in-one IC driver FD6288Q driver, imported high-quality Murata capacitor application high-end resin plug hole PCB production process, pads are metallized edging, so that you can avoid pads falling off when using; 2 ounces copper thickness, 6-layer plate, greatly reduce heat generation, higher efficiency.

Hardware: PWM, Damped Light

Hardware PWM drives the motor, less noise, smoother throttle response. Damped Light technology, regenerative braking function, make the motor deceleration more sensitive and effective, and the control more accurate; Active freewheeling technology allows the battery to recycle power

4230 65A 4IN1 ESC

Product Features:

1. PCB adopts high-end 6-layer 2oZ thickened copper skin, which has stronger overcurrent capability and good heat dissipation.

2. MOS adopts imported 40V high current resistance MOS, long life with strong load capacity.

3. Adopt industrial grade LDO, high temperature resistance.

4. Using high-quality Japanese Murata capacitors, strong filtering performance

Small size, full function, can monitor motor speed and temperature in real time.

Size: 40*43mm (30mm-30mm mounting hole)

Packing size: ø64*64*35mm

Product net weight: 14g

Package weight: 53g

ESC parameters:

ESC firmware: HAKRC_AT4G_Multi_32.9 Hex

Protocol support: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600

Input voltage: 2S-8S Lipo

Galvanometer ratio: 160

Continuous current: 65A

Peak current: 75A




Welcome to Drones and drone accessories wholesale factory wholesale shop. Our mission is to provide our customers with the highest quality products and customer service. Customer satisfaction is our number one priority and whenever and wherever you need anything, all you have to do is simply ask and we will do our best to help you.

1. All price does not include any taxes or extra fees. We are not responsible for the problems caused by customs clearance. 

2. Orders processed timely after the payment verification.

3. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address. 

4. The images shown are not the actual item and are for your reference only. 

5. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit time may vary, particularly during the holiday season. 

6. If you have not received your order after the Estimated Delivery of Shipping Method, please contact us in advance. We will trace your order and get back to you asap.

(Please notice that we can't decide your decisions about choosing to ship methods, which means you need to check carefully with the estimate delivery time and promise delivery time) Your satisfaction is our top priority!


1. You have 30 days to contact us  No reason to return within 30 days after signing,The shipping cost is Seller . 

2. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your order ID. 

3. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from ebay. OR, you may choose to have a replacement. 

4. We will bear all the shipping cost if the product(s) is (are) not as advertised.


We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important. We request that you contact us immediately BEFORE you give us neutral or negative feedback so that we can perform up to your satisfaction. 

It is impossible to address issues if we do not know about them!

We can be contacted at any time through eBay messages if you have any questions, comments or product requests. We will respond in a timely manner and will do our best to help you out. We encourage our customers to contact us with any questions or concerns. We'd like to be sure you are completely satisfied with your purchase.
About Us

Welcome to Drones and drone accessories wholesale factory wholesale shop. Our mission is to provide our customers with the highest quality products and customer service. Customer satisfaction is our number one priority and whenever and wherever you need anything, all you have to do is simply ask and we will do our best to help you.

Shipping

1. All price does not include any taxes or extra fees. We are not responsible for the problems caused by customs clearance. 

2. Orders processed timely after the payment verification.

3. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address. 

4. The images shown are not the actual item and are for your reference only. 

5. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit time may vary, particularly during the holiday season. 

6. If you have not received your order after the Estimated Delivery of Shipping Method, please contact us in advance. We will trace your order and get back to you asap.

(Please notice that we can't decide your decisions about choosing to ship methods, which means you need to check carefully with the estimate delivery time and promise delivery time) Your satisfaction is our top priority!


Returns

1. You have 30 days to contact us  No reason to return within 30 days after signing,The shipping cost is Seller . 

2. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your order ID. 

3. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from ebay. OR, you may choose to have a replacement. 

4. We will bear all the shipping cost if the product(s) is (are) not as advertised.


Feedback

We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important. We request that you contact us immediately BEFORE you give us neutral or negative feedback so that we can perform up to your satisfaction. 

It is impossible to address issues if we do not know about them!

Contact us
We can be contacted at any time through eBay messages if you have any questions, comments or product requests. We will respond in a timely manner and will do our best to help you out. We encourage our customers to contact us with any questions or concerns. We'd like to be sure you are completely satisfied with your purchase.