【Operation Instructions】
1.Press and hold the power button for 2-3 seconds to switch on the UPS.
2.Please charge the UPS fully before connection. When connecting DC Power adapter the light flashes. it is charging. Whilst charging. the power indicator lights will indicate the capacity of the battery from 25% -100% respectively. 100% is fully charged. Once fully charged disconnect from the DC Power adapter.
3.Once battery backup mode is active. The power indicator lights will turn off from 100% -25% respectively
as the battery power depletes. When the light flashes at 25%, the battery power is low and the UPS needs to be turned off by pressing the power button for 2-3 seconds.
4.The UPS will be shut down automatically once the battery power is low.
5.To avoid over-discharging of the lithium batteries. Please charges UPS with the DC power adapter after the low battery shut down.
6.The output power of this UPS is controlled by total power capacity. The total power that is connected to all the ports cannot exceed the maximum output power. If so. all output ports will close and the UPS will shut down automatically.Please remove excess loads.
7.Before connecting your device to the UPS, check its working voltage, current and polarity which you can find on the original adapter.
8.To avoid over-discharging of the lithium batteries. Please charges UPS with the DC power adapter after the low battery shut down.
9.If the UPS is not in use, please ensure it is fully charged and kept in a cool place. If the UPS has not been in use for a while,please connect to DC power adapter until the battery is fully charged. Charging the battery once a month is recommended to prolong battery life.