integratemote
Support cumulative data zeroing, no-load forced zeroing
Support voltage display fine-tuning, current display fine-tuning
Column temperature waterproof probe, temperature measurement range -40 ~ 120 ℃
High-definition IPS LCD color screen, 135*240 resolution
Simultaneous measurement of voltage Current Power Percentage power Temperature Cumulative capacity Energy Running time
10A technical parameters:
Instrument operating voltage: XH-3P red and black wire DC4~30V (Do not over-voltage power supply)
Wire Definition Introduction:
XH-2.54-3P red, black and yellow wire (thin wire Total length: 155mm)
Thin red wire: positive pole of the working power supply, can not be connected to the power supply above 30V.
Thin black wire: negative pole of working power supply, common ground with thick black wire, no need to connect when sharing power supply.
Thin yellow line: voltage test line, connected to the positive pole of the test circuit power supply.
VH-3.96-2P thick red and black wires (thick wire total length: 165mm) current test line, thick wire parallel shunt resistor, can not be directly connected to the power supply poles, will be shorted.
Thick red wire: current test positive pole, string in the negative end of the load, connected to the broken line after the first broken
Thick black wire: current test negative, connected to the negative pole of the power supply, connected to the broken line after the first connection broken
10A meter on-board low temperature resistor shunt, according to the wiring diagram, Derectly use, no need connect a external shunt
Voltage Measurement Range: DC0~100V Error ±1.00V 0.1V start jumping
Current Measurement Range: 0.00A~10.00A Error ±0.1A 0.03A jumping
Power measurement range: 00.00~1000W
Capacity measurement range: 0~9999999mAh
Energy measurement range: 0~9999999mWh
Temperature sensor: column waterproof probe NTC 10K 3950 1% sensor Total length about 1 meter
Temperature metering range: -40~120℃ (external temperature measured by NTC sensor)
Time measurement range: 0~999:59:59 (hours:minutes:seconds)
Operating energy consumption: 20mA (measured by DC12V)
Support: Accumulated data zeroing No-load forced zeroing Voltage display fine-tuning Current display fine-tuning
Percentage power display: percentage power based on voltage reference (need to manually set full and low power voltage)
Product size: 47.59×28.67×25.33mm
Installation aperture: 45 × 26mm
50A technical parameters:
Meter operating voltage: XH-3P red and black wire DC4~30V (Do not over-voltage power supply)
Conductor definition introduction:
XH-2.54-3P red, black and yellow wire (thin wire Total length: 155mm)
Thin red wire: positive pole of the working power supply, can not be connected to the power supply above 30V.
Thin black wire: negative pole of working power supply, common ground with thick black wire, no need to connect when sharing power supply.
Thin yellow line: voltage test line, connected to the positive pole of the test circuit power supply.
VH-3.96-2P thick red and black wires (thick wire total length: 165mm) current test line, thick wire can not be directly connected to the power supply poles, it will be shorted.
Thick red wire: positive pole of current test, shunt shunt series in the negative end of the load back end
Thick black wire: current test negative pole, parallel shunt connected to the negative pole of the power supply
Connect the shunt: need to be connected in parallel with a 50A 75mV shunt can be used (buyer should buy a shunt themself)
Voltage Measurement Range: DC0~100V Error ±1.00V 0.1V start jumping
Current Measurement Range: 0.00A~50.00A Error ±0.5A 0.03A jumping
Power measurement range: 00.00~5000W
Capacity measurement range: 0~9999999mAh
Energy measurement range: 0~9999999mWh
Temperature sensor: column waterproof probe NTC 10K 3950 1% sensor Total length about 1 meter
Temperature metering range: -40~120℃ (external temperature measured by NTC sensor)
Time measurement range: 0~999:59:59 (hours:minutes:seconds)
Operating energy consumption: 20mA (measured by DC12V)
Support: Accumulated data zeroing No-load forced zeroing Voltage display fine-tuning Current display fine-tuning
Percentage power display: percentage power based on voltage reference (need to manually set full and low power voltage)
Product size: 47.59×28.67×25.33mm
Installation aperture: 45 × 26mm
Instrument working voltage: XH-3P red and black wire DC4~30V (Do not over-voltage power supply)
Wire definition introduction:
XH-2.54-3P red, black and yellow wire (thin wire Total length: 155mm)
Thin red wire: positive pole of the working power supply, can not be connected to the power supply above 30V.
Thin black wire: negative pole of working power supply, common ground with thick black wire, no need to connect when sharing power supply.
Thin yellow line: voltage test line, connected to the positive pole of the test circuit power supply.
VH-3.96-2P Thick red and black wires (thick wire total length: 165mm) Current test line
Thick wire parallel shunt resistor, can not be directly connected to the power supply poles, will be short-circuited.
Coarse red wire: current test positive pole, parallel shunt series in the negative end of the load rear.
Thick black wire: current test negative, shunt shunt connected to the negative terminal of the power supply.
Connecting shunt: need to connect 100A 75mV shunt in parallel to use (buyer should buy a shunt themself)
Voltage measurement range: DC0~100V Error ±1.00V 0.1V start jumping
Current Measurement Range: 0.00A~100.00A Error ±1A 0.03A jumping
Power measurement range: 00.00~9999W
Capacity measurement range: 0~9999999mAh
Energy measurement range: 0~9999999mWh
Temperature sensor: column waterproof probe NTC 10K 3950 1% sensor Total length about 1 meter
Temperature metering range: -40~120℃ (external temperature measured by NTC sensor)
Time measurement range: 0~999:59:59 (hours:minutes:seconds)
Operating energy consumption: 20mA (measured by DC12V)
Support: Accumulated data zeroing No-load forced zeroing Voltage display fine-tuning Current display fine-tuning
Percentage power display: percentage power based on voltage reference (need to manually set full and low power voltage)
Product size: 47.59×28.67×25.33mm
Installation opening: 45 x 26mm
Electronic manual:
10A: https://www.banber.com/gather/64c7518903dc0b3d70f25790
50A : https://www.banber.com/gather/64c751a803dc0b3d70f258f0
100A : https://www.banber.com/gather/64c7519c03dc0b3d70f25840
Measuring Instrument X1
Column waterproof probe sensing wire X1
XH-2.54-3P Red, black and yellow wire X1
VH-3.96-2P Coarse red and black wire X1
1.A large number of products for you to choose
2.We have an independent customer service team to quickly answer your questions
1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.
2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances. 3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.
1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3.All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.
1.We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.
2.Please DON'T leave negative or neutral feedback if you haven't received item in 30 days, because we have mentioned the shipping time repeatedly.
1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.
3. Please include your eBay ID and item number with any email requests.
1. If you have any questions, please feel free to email our service specialists.
2.Just contact us using the " Ask the seller a question" link on eBay.
3.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.
Am 05.09.2023 hat der Verkäufer die folgenden Angaben hinzugefügt: