Supermicro SuperStorage 2028R-DE2CR24L 2-Node X10DRS-2U 2x E5-2650v3 64GB Ram

Chassis Model: 2028R-DE2CR24L
Supermicro Node Motherboard P/N: X10DRS-2U
Backplane: BPN-SAS3-927-N4

In Good Condition, Full Working Order
Tested
Includes Rails
2 Years Warranty
Included
    • 1 x Supermicro 2028R-DE2CR24L CSE-927 24-Bay Chassis With:
      • 1 x Backplane BPN-SAS3-927-N4 rev 1.00 with 24-Bay 2.5" SAS/SATA Hard Drive Bays and Caddies
      • 2 x 1200W Power Supplies - PWS-1K23A-1R
    • 2 x Super X10DRS-2U rev 1.03 Nodes Each With:
      • 2 x Intel Xeon 10-Core E5-2650v3 2.3GHz Processors With Heatsinks (SNK-P0048PS, SNK-P0047PS)
      • 8 x 8GB DDR4 Memory
      • 1 x Riser Card RSC-R2US-3E8R with 3x PCIe 3.0 x8 Slots with:
        • 1 x Emulex OCe14102 Dual Port 10Gb Network Adapter P008827-21F with:
          • 2 x 10Gb SFP+ Transceiver Modules
      • 1 x Supermicro AOM-S3008-L8-SB SAS 12Gb/s RAID Mezzanine Module Card
        • RAID Levels: 0, 1, 1E, and 10
    Specification

    Motherboard (Two per System)

    Super X10DRS-2U
     
    Processor/Cache (per Node)
    CPU
    • Intel® Xeon® processor E5-2600 v4/ v3 family (up to 145W TDP) *
    • Dual Socket R3 (LGA 2011)
    Cores / Cache
    • Up to 22 Cores / Up to 55MB Cache
    System Bus
    • QPI up to 9.6 GT/s
    Note BIOS version 2.0 or above is required


    System Memory (per Node)
    Memory Capacity
    • 8x 288-pin DDR4 DIMM slots
    • Up to 1TB ECC 3DS LRDIMM, 256GB ECC RDIMM
    Memory Type
    • 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
    DIMM Sizes
    • RDIMM: 32GB, 16GB, 8GB, 4GB
    • LRDIMM: 64GB, 32GB
    • 3DS LRDIMM: 128GB
    Memory Voltage
    • 1.2 V
    Error Detection
    • Corrects single-bit errors
    NVDIMM
    • NVDIMM support. (Not all vendor's NVDIMM are supported. Please contact your sales representative for details)
     
    On-Board Devices (per Node)
    Chipset
    • Intel® C612 chipset
    SAS
    • SAS3 (12Gbps) via Broadcom 3008
    SATA
    • SATA3 (6Gbps); RAID 0, 1, 5, 10
    IPMI
    • Support for Intelligent Platform Management Interface v.2.0
    • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
    • ASPEED AST2400 BMC
    Network Controllers
    • Intel® X540 Dual Port 10GBase-T
    • 100Mb private ethernet between controller nodes
    • Virtual Machine Device Queues reduce I/O overhead
    • Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output
    • 1 Realtek RTL8201N PHY (dedicated IPMI)
    Video
    • ASPEED AST2400 BMC
    Others
    • PCI-E 3.0 x8 node to node/NTB connectivity
    • PLX Technology PEX8717; PLX ExpressNIC SDK available from PLX. NDA required
     
    Input / Output (per Node)
    SAS
    • 2 JBOD expansion ports per node
      (mini-SAS HD)
    LAN
    • 2 RJ45 10GBase-T LAN ports
    • IPMI LAN shared port
    USB
    • 3 USB 3.0 ports (2 rear + 1 Type A)
    Video
    • 1 VGA port
    Serial Port / Header
    • 1 COM port (rear)
    Chassis
    Form Factor
    • 2U Rackmount
    Model
    • CSE-927ETS
     
    Dimensions
    Width
    • 17.2" (437mm)
    Height
    • 3.5" (89mm)
    Depth
    • 25.25" (641mm)
    Gross Weight
    • 67 lbs (30.4 kg)
    Available Colors
    • Black
     
    Front Panel
    Buttons
    • Power On/Off button
    LEDs
    • Power LED
    • Heartbeat LED
    • 2 Network activity LEDs
    • Power Fail LED
    • Overheat/Fan Fail LED
     
    Expansion Slots (per Node)
    PCI-Express (per node)
    • 3 PCI-E 3.0 x8 low-profile slots
     
    Drive Bays
    Hot-swap
    • 24 Hot-swap 2.5" SAS3 HDD bays
     
    Backplane
    SAS3 12Gbps passive backplane, redundant architecture with single expander on each motherboard. Motherboard also support 2x mini-SAS HD connectors for JBOD expansion
     
    System Cooling
    Fans
    • 4 Hot-swap 8cm midplane fans, 2 counter-rotating 4cm fans per node
     
    Power Supply
    Redundant 1U 1200W/1000W Titanium Power Supply W/PMbus W76xL360xH40mm
    AC Input
    • 1000W Output @ 100-127V, 12-15A, 50-60Hz
    • 1200W Output @ 200-240V, 7-8.5A, 50-60Hz
    DC Output
    • 1000W: +12V/83A; +5Vsb/4A
    • 1200W: +12V/100A, +5Vsb/4A
    CertificationTitanium Certified
     
    System power redundancy provided at 240V only.
     
    System BIOS
    BIOS Type
    • 128Mb SPI Flash EEPROM with AMI BIOS
    BIOS Features
    • Plug and Play (PnP)
    • APM 1.2
    • PCI 2.2
    • ACPI 1.0 / 2.0
    • USB Keyboard support
    • SMBIOS 2.3
    • UEFI
     
    Operating Environment / Compliance
    RoHS
    • RoHS Compliant
    Environmental Spec.
    • Operating Temperature:
         10°C to 35°C (50°F to 95°F)
    • Non-operating Temperature:
         -40°C to 70°C (-40°F to 158°F)
    • Operating Relative Humidity:
         8% to 90% (non-condensing)
    • Non-operating Relative Humidity:
         5% to 95% (non-condensing)



























































    CS 278912 278913 278914 278915 278916 278918 278919 278920 278921 w/rls dup .co.uk
    CS 278917 -a 1 sfp w/rls dup .co.uk