Clear housings on the first stage pre-filters , easy to check when filter was dirty.Our filters are industrial standard length in 10 inches, suitable most of RO system , replacement can be found at our STORE(save big money) or most local water filter companies .The filter can work for 12 months and create the 2500-3000 gallons pure water
Specifications | This reverse osmosis unit is designed to operate at a water pressure in the range of 40-80 PSI. and the best is 65PSIIf the pressure of the incoming tap water is too low (less than 40 PSI), you 'll have to buy extra booster pump to make it workAt pressure lower than this, the quantity as well as quality will be reduce. At higher pressure will damage to the systemIf local water pressure exceeds 85 PSI, a pressure regulator must be installed, reducing the water pressure into the system
weight: 25 LBPackage Content | This is the complete system already assembled and comes with the clear instructions and all filters.1 x 6-Stage Reverse Osmosis RO+DI System with 1 x 10" 5 micron Polypropylene sediment Pre-Filter with housing with 2 x 10" 5 micron coconut carbon block Pre-Filter with housing with 1 x 10" Premiun Quality Housing for Reverse Osmosis Membrane with 1 x 10" 0 PPM De-Ionized DI Post-Filter with 1 x 10" in-line granular activated carbon Post-Filter with 1 x Auto Shut Off Valve with 1 x Flow Restrictor with 1 x Built in check valve 1 x sealed TFC (made in USA) RO Membrane3 x 60" Food Grade Tubing1 x Filter Housing Wrench1 x Saddle Clamp Drain Valve1 x Feed Water Device for under sink shut-off valves (1/2" & 3/8") 1 x RO faucet1 x RO 3gallons plastic water tank |
|
|