integratemote
1. The module can be realized through the 3.7V 18650 lithium battery and Type-C port input 5V power supply to the microcontroller uninterrupted power supply.
2. Can also be used as part of the electrical parameters of the appropriate module power supply (not directly connected to the motor).
3. The module outputs 5V, 3.3V, 1.8V in the form of 2.54mm spacing rows of pins, which can be used in a variety of scenarios as a power supply.
4. The module has 4 indicator lights, used to identify the current battery power and battery charging.
5. Easy to use, the module supports charging and discharging at the same time, there is a toggle switch on the module to control the output.
USB port input voltage: 4.7-5.5V
Battery operating voltage: 3.1-4.3V
Battery full voltage:4.15-4.25V
MAX output current:
5V:1.5A
3.3V:400mA
1.8V:150mA
Cut-off output voltage:Battery 3V
Side discharge: output voltage is 4.5V MAX 400mA or so
Battery connection mode: parallel connection (battery can be connected to one or two)
Discharge mode.
LED1:Battery remaining ≤25% (blinking indicates that the battery is less than 3% and should be charged).
LED2:≤50% battery remaining
LED3:Remaining power ≤75%.
LED4:Remaining battery ≤ 100%
LED1:Blinking indicates that the current charging power is less than 25%.
LED2:Blinking indicates that the current charging power is less than 50%.
LED3:Blinking indicates that the current charging power is less than 75%.
LED4:Blinking indicates that the current charging power is less than 100%, normally lit is full.
1, the module with a toggle switch, can control the output, when dialed to the left is off the output, dialed to the right to open the output.
2, if the battery protection chip triggered protection, installation of new batteries, open the switch indicator is not lit, you can access the usb port charging activation.
3、After shutting down the output, the indicator light will continue to light up for about 30s and then turn off; 4、Attention to the way of connecting the battery on the module.
4, pay attention to the module connected to the battery mode for parallel connection, do not connect the battery to the module in series.
5, pay attention to the distinction between positive and negative poles, reverse will burn the module (positive and negative silkscreen on the board, strictly in accordance with the silkscreen instructions for the installation of batteries).
6, pay attention to the output do not short-circuit input and output interfaces.
7, pay attention to the module output interface can not be directly connected to the motor.
Battery: 18650 with 70m Ω internal resistance.
Battery capacity 2000mAH: can output 5V1A
Battery capacity 3000mAH: can output 5V1.5A.
Battery MAX input voltage is determined by the load, MAX output current is 1.5A, the parameters can be derived from the following formula: lin=(5*lout)/(0.7*Vin)
It is recommended to use 18650 batteries with total capacity over 1500mAH.
1X Module
1.A large number of products for you to choose
2.We have an independent customer service team to quickly answer your questions
1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.
2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances. 3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.
1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3.All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.
1.We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.
2.Please DON'T leave negative or neutral feedback if you haven't received item in 30 days, because we have mentioned the shipping time repeatedly.
1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.
3. Please include your eBay ID and item number with any email requests.
1. If you have any questions, please feel free to email our service specialists.
2.Just contact us using the " Ask the seller a question" link on eBay.
3.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.
Am 21.09.2023 hat der Verkäufer die folgenden Angaben hinzugefügt: