12V DC Automotive Battery Tester - Alternator/Battery Check/Diagnostic Tool

INTRODUCTION

This tester can be used to test the charge condition of 12V battery and the check charging circuit of 12V vehicle battery. It is compact and easy to use.


STRUCTURE

                          

OPERATING INSTRUCTION
Note: After you connect the black clip of the tester to the negative terminal of a 12V battery and connect the red clip of the tester to the positive terminal
of this battery, the " POWER " light on the tester will illuminate as an power indicator; if the the " POWER " light does not illuminate, check if the
connections are good.

Charger Check
While charging a 12V battery with a battery charger, connect the red clip of the tester to the positive terminal of the battery, and connect the black clip of
the tester to the negative terminal of the battery. When the red light against " Charger Check " is lit, charging is complete.

Alternator Check
To check the charging circuit of a 12V vehicle battery, connect the red clip ( or red probe ) of the tester to the positive terminal of the vehicle battery, and
connect the black clip of the tester to the negative terminal of the vehicle battery. Accelerate your engine to 2000 rpm. If the red light against " Alternator
Check " is lit, the charging circuit is OK.

Battery Check
An accurate indication of a battery's charge level will be possible only if the battery has not been charged or discharged for at least 30 minutes. To
check the charge level of a 12V battery, connect the red clip ( or red probe ) of the tester to the positive terminal of the battery, and connect the black
clip of the tester to the negative terminal of the battery. If none of the red lights are lit, check the connections of the tester to the battery. The red lights
will indicate the approximate charge level of the battery.

WARNING
1. Before use, inspect the tester. Do not use the tester if it is damaged.
2. Before use, verify the tester's operation by testing a known 12V battery.
3. Always follow the relevant instructions and procedures indicated in the vehicle's users manual and service manual.
4. Do not use the tester where explosive gas, vapor, or dust is present.
5. To avoid personal injury and tester damage, do not touch any moving or turning object of vehicle.
Do not touch any high-temperature object with hand or skin.
6. To avoid electric shock, don't touch any naked conductor with hand or skin.
7. Use caution when working with voltage above 30V ac rms, 42V peak, or 60V dc. Such voltages pose a shock hazard.

SPECIFICATION
Operating Environment: temperature: 0°C ~ 40°C
relative humidity: < 75%
Storage Environment: temperature: -10°C~ 50°C
relative humidity: < 85%
Size: 102×46×16mm ( main body only )
Weight: About 73g ( GK503 only )


Payment

1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.

Shipping

1.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2.Items will be shipped within 1-3 business day when we received payment.
3.Delivery time depends on destination and other factors;
4.International buyers please note:
  a.Import duties, taxes and charges are not included in the item price or shipping charges. These charges are buyer’s responsibility. We will try our best to reduce the risk of the custom duties.
  b.Please check with your country's customs office to determine what these additional costs will be prior to buying.

Returns

Returns Accepted, Buyer, 30 Days, Money back or exchange (buyer's choice)

1.Incoming damaged or defective when you receive, please contact us within 2 days after receiving the         item.

2.Replacement or refund will be proceeded once defect confirmed.

3.Please be reminded when return, the items should be with original condition ( original packing,           accessories, unused item…).

 

4.Except incoming defect, returning shipping fee is handled by buyer.

1.Incoming damaged or defective when you receive, please contact us within 2 days after receiving the item.
2.Replacement or refund will be proceeded once defect confirmed.
3.Please be reminded when return, the items should be with original condition ( original packing, accessories, unused item…).
4.Except incoming defect, returning shipping fee is handled by buyer.
Contact Us

Please feel free to contact us via eBay or e-Mail if you have any question. We will reply within 24 hours in working day.


All right reserved.