Item Title

dbx 286S Channel Strip Microphone Preamp

Description

DBX 286SChannel StripHigh-quality microphone preamplifiers and four processors are packaged in an EIA1U. The DBX 286S is a cost-effective solution for building a full-fledged sound reinforcement system.Microphone inputs are on XLR connectors and line inputs are on standard phone jacks (3-pin), both electronically balanced, with 4-segment LED level meters and an 80 Hz, 18 dB/oct high-pass filter to reduce unwanted low-frequency noise. The microphone input can be supplied with 48V phantom power.The compressor is simply set with a DRIVE knob to adjust the amount of gain reduction and a DENSITY knob to adjust the release time. Gain reduction is indicated on an 8-segment LED meter for detailed adjustment.A two-step gain reduction indicator is also provided.The HF knob emphasizes the high-frequency spectrum according to the signal content, improving the clarity of vocals, guitars, and wind instruments; the LF knob enhances bass while reducing the bandwidth that muddies the sound, improving the power of male vocals and low-frequency-rich percussion instruments; the LF knob reduces the frequency range that muddies the sound, improving the clarity of percussion instruments; and the HF knob enhances the high frequency spectrum according to the signal content, improving the clarity of vocals, guitars, and wind instruments.The expander/gate has adjustable threshold and ratio, and an LED indicator to confirm the threshold. The wide range of ratio adjustment makes it applicable to a wide variety of sound sources.The output jacks are equipped with standard phone jacks, and the output jacks are equipped with a bypass function that disconnects the four processors and output gain adjustment.The output jack is a standard phone jack (3-pin), pseudo-balanced (*).The knob has a click for easy reproduction of settings.The cold side is connected to ground through a resistor of the same value as the output resistor on the hot side.Number of channels 1Microphone input Terminal, type XLR, electronically balancedImpedance 1.75k ohmsMaximum level -11.8dBuLine input Terminal type Standard phone jack (3-pin), electronically balancedImpedance 60k ohmsMaximum level +21dBuAudio Output Terminal, standard phone jack (3-pin), pseudo-balancedImpedance 200ΩMaximum level +21dBuFrequency Response 20Hz to 20kHz (±0.5dB)THD 0.08% (+10dBu, 20Hz to 20kHz)Dynamic range 105dBPower supply AC100V, 50/60Hz, 15WDimensions and weight* W483 x H45 x D150mm, EIA1U, 2.3kg

Payment

Supports managed payments Please pay within 5 days after auction is finished.

About Us

We are located in Japan. It's our pleasure to make you happy by proposing our recommend item. If you have any questions or request about items, please feel free to ask us.

International Buyers - Please Note:

-Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. -Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. -These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. -We do not mark merchandise values below value or mark items as - gifts - The US and International government regulations prohibit such behavior.

Thank you for your understanding.