CNC USB MACH3 100Khz Breakout Board 4 Axis Interface Drive Module
2. The maximum step pulse frequency is 100KHz, suitable for servo or stepper motors;
3. Support automatic probe tool
4. Support emergency input
5. Support limit switch
6. Support connection with electronic handwheel
7. An external 24V DC power supply is required to isolate the USB and external ports to make the system more stable
8. With 0-10V output port, you can use mach3 software to control the speed of the spindle motor.
9.4 channels of universal input, can be connected to limit switch, emergency stop switch, probe switch, zero return and other devices
10.4 universal isolated relay drive output interfaces, which can drive 4 relays to control the spindle start, forward and reverse rotation, water pump and other equipment
11.1 Status LEDs to indicate on-board connection status
Machine tools are not toys! Improper operation will bring certain danger! ! !
The most common mistake for beginners is to run the G code rashly without mastering the properties of the machine tool, causing the spindle of the engraving machine to hit the engraving machine bracket.
Therefore, it is recommended that limit switches and emergency stop switches must be installed first.
If these protection switches are not installed, in an emergency, in addition to pressing the emergency stop to return (sometimes it is too late to press), turn off the motor power (sometimes it is too late to turn off),
In addition, the most convenient way to stop is:
Unplug the USB cable! As long as you unplug the USB cable, the machine will automatically stop
Controller card*1
USB cable*1
1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3.All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.
1.We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.
2.Please DON'T leave negative or neutral feedback if you haven't received item in 30 days, because we have mentioned the shipping time repeatedly.
1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.
2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.
3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.
1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.
3. Please include your eBay ID and item number with any email requests.
1. If you have any questions, please feel free to email our service specialists.
2.Just contact us using the " Ask the seller a question" link on eBay.
3.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.
2. The maximum step pulse frequency is 100KHz, suitable for servo or stepper motors;
3. Support automatic probe tool
4. Support emergency input
5. Support limit switch
6. Support connection with electronic handwheel
7. An external 24V DC power supply is required to isolate the USB and external ports to make the system more stable
8. With 0-10V output port, you can use mach3 software to control the speed of the spindle motor.
9.4 channels of universal input, can be connected to limit switch, emergency stop switch, probe switch, zero return and other devices
10.4 universal isolated relay drive output interfaces, which can drive 4 relays to control the spindle start, forward and reverse rotation, water pump and other equipment
11.1 Status LEDs to indicate on-board connection status
Machine tools are not toys! Improper operation will bring certain danger! ! !
The most common mistake for beginners is to run the G code rashly without mastering the properties of the machine tool, causing the spindle of the engraving machine to hit the engraving machine bracket.
Therefore, it is recommended that limit switches and emergency stop switches must be installed first.
If these protection switches are not installed, in an emergency, in addition to pressing the emergency stop to return (sometimes it is too late to press), turn off the motor power (sometimes it is too late to turn off),
In addition, the most convenient way to stop is:
Unplug the USB cable! As long as you unplug the USB cable, the machine will automatically stop
Controller card*1
USB cable*1
1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3.All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.
1.We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.
2.Please DON'T leave negative or neutral feedback if you haven't received item in 30 days, because we have mentioned the shipping time repeatedly.
1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.
2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.
3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.
1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.
3. Please include your eBay ID and item number with any email requests.
1. If you have any questions, please feel free to email our service specialists.
2.Just contact us using the " Ask the seller a question" link on eBay.
3.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.
Am 13.10.2023 hat der Verkäufer die folgenden Angaben hinzugefügt: