Sophisticated product, please handle with care; quality first, credit upmost;  Your satisfaction is our pursuit;The strength of technology decide the quality of technology.                                         if  you have any problem,pls contact with us.

5V 20A 2 Channel Relay Control Module Support High And Low Voltage Trigger

Product introduction:

    The two-way isolated relay control module can select high level or low level to control the pull-in of the relay according to user needs. The module uses genuine high-quality power relays, the industry’s top ultra-small packaged optocouplers, high-power and high-voltage transistors, red signal indicators, military-grade double-sided PCB boards, comprehensive board layout considerations, stable performance, and can be widely used in various Power control occasions

I. Module description

  1. The module uses genuine high-quality relays, AC 125V/20A, DC 14V/20A;
  2. Using the industry's top quality ultra-small two-way isolation optocoupler, strong anti-interference ability and stable performance;
  3. The working voltage of the module is 5V; there are 1 way, 2 way, 4 way, 8 way, 16 way module to choose from;
  4. The user can select the control level of the relay, which can be high-level pull-in or low-level pull-in; the module contains a current-limiting resistor, which can be directly controlled by the positive and negative electrodes of the power supply, or the I of the microcontroller /O port control;
  5. Fault-tolerant design, even if the control line is broken, the relay will not act;
  6. The interface design is humanized, all interfaces can be directly connected through the terminal block, which is very convenient;
  7. There are 4 fixing bolt holes for easy installation;
  8. Relay status indicator (red)

II. Module interface

Module input control terminal

  1. DC+: External DC power supply positive
  2. DC-: External DC power supply negative
  3. VREF: Reference ground wire of optoelectronic isolation control terminal,

If high level control is adopted: this signal should be connected to the negative terminal of the power supply of the user control panel

If low-level control is adopted: this signal should be connected to the positive terminal of the power supply of the user control board

  1. CH-CH: Relay control interface,

If VREF is connected to the negative pole of the power supply: when this port is high (relative to VREF), the corresponding relay is closed

If VREF is connected to the positive pole of the power supply: when this port is low (relative to VREF), the corresponding relay is closed

Note: The isolated relay module is to adapt to the severe electromagnetic environment or high signal requirements. If you want to achieve a complete isolation effect, the power supply of the user control board (that is, the reference power supply connected to the VERF) and the power supply of the relay module (DC+/DC-) should be distinguished. If the two power supplies share the same ground, it is not a complete isolation effect. At this time, users can choose our more economical standard relay module

 

Package Included:

Relay control module x1

1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.

2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.

3.All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.

1.We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.

2.Please DON'T leave negative or neutral feedback if you haven't received item in 30 days, because we have mentioned the shipping time repeatedly.

1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.

2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.

3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.

 

1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.

2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.

3. Please include your eBay ID and item number with any email requests.

 

1. If you have any questions, please feel free to email our service specialists.

2.Just contact us using the " Ask the seller a question" link on eBay.

3.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.

5V 20A 2 Channel Relay Control Module Support High And Low Voltage Trigger

Product introduction:

    The two-way isolated relay control module can select high level or low level to control the pull-in of the relay according to user needs. The module uses genuine high-quality power relays, the industry’s top ultra-small packaged optocouplers, high-power and high-voltage transistors, red signal indicators, military-grade double-sided PCB boards, comprehensive board layout considerations, stable performance, and can be widely used in various Power control occasions

I. Module description

  1. The module uses genuine high-quality relays, AC 125V/20A, DC 14V/20A;
  2. Using the industry's top quality ultra-small two-way isolation optocoupler, strong anti-interference ability and stable performance;
  3. The working voltage of the module is 5V; there are 1 way, 2 way, 4 way, 8 way, 16 way module to choose from;
  4. The user can select the control level of the relay, which can be high-level pull-in or low-level pull-in; the module contains a current-limiting resistor, which can be directly controlled by the positive and negative electrodes of the power supply, or the I of the microcontroller /O port control;
  5. Fault-tolerant design, even if the control line is broken, the relay will not act;
  6. The interface design is humanized, all interfaces can be directly connected through the terminal block, which is very convenient;
  7. There are 4 fixing bolt holes for easy installation;
  8. Relay status indicator (red)

II. Module interface

Module input control terminal

  1. DC+: External DC power supply positive
  2. DC-: External DC power supply negative
  3. VREF: Reference ground wire of optoelectronic isolation control terminal,

If high level control is adopted: this signal should be connected to the negative terminal of the power supply of the user control panel

If low-level control is adopted: this signal should be connected to the positive terminal of the power supply of the user control board

  1. CH-CH: Relay control interface,

If VREF is connected to the negative pole of the power supply: when this port is high (relative to VREF), the corresponding relay is closed

If VREF is connected to the positive pole of the power supply: when this port is low (relative to VREF), the corresponding relay is closed

Note: The isolated relay module is to adapt to the severe electromagnetic environment or high signal requirements. If you want to achieve a complete isolation effect, the power supply of the user control board (that is, the reference power supply connected to the VERF) and the power supply of the relay module (DC+/DC-) should be distinguished. If the two power supplies share the same ground, it is not a complete isolation effect. At this time, users can choose our more economical standard relay module

 

Package Included:

Relay control module x1

1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.

2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.

3.All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.

1.We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.

2.Please DON'T leave negative or neutral feedback if you haven't received item in 30 days, because we have mentioned the shipping time repeatedly.

1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.

2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.

3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.

 

1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.

2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.

3. Please include your eBay ID and item number with any email requests.

 

1. If you have any questions, please feel free to email our service specialists.

2.Just contact us using the " Ask the seller a question" link on eBay.

3.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.

Am 13.10.2023 hat der Verkäufer die folgenden Angaben hinzugefügt:

DataCaciques