eBay

Descriptions:

Button: 5 Buttons

FCC:M3N65981403

Part Number: GM/PN: 10372541 Driver/Memory 1,10372542 Driver/Memory 2

Frequency: 315 MHz

Chip:ID46

Blade: without

Package includes:1 x Complete Remote Key

Compatible with below Vehicles:

2005 - 2007 Chevrolet Corvette

2005 - 2007 Cadillac STS

Note:

1. Please make sure your original key has the same appearance, button, frequency, Part Number and FCC ID with the product. The most important is to ensure compatibility.

2. You need to go to your local qualified locksmith store to program the key and cut the blade after you receive it. People there will know what to do.

Any question please feel free to let us know, thanks for your patronage!

Please check the above information clearly ,

if the above all match , it‘s ok to buy this product.The Compatibility is for reference only!!!

year : 2005 - 2009

Quick Learn Method:

IMPORTANT: This procedure is not available when the maximum number of 4 fobs have been programmed. If 4 key fobs are programmed to this RCDLR and this method

is attempted, the driver information center (DIC) will display, MAX FOBS LEARNED and the programming procedure will exit.

This procedure will add key fobs. Fobs will be numbered in sequence based on when they are programmed; if 2 fobs are currently programmed to the RCDLR, a fob programmed

using this method will be numbered as Fob 3. This procedure requires that you have a known good key fob, a replacement key fob, and the vehicle's mechanical key.

1. The vehicle must be off.

2. Open rear compartment

3. Place a known key fob within the interior of the vehicle.

4. At the rear of the vehicle, insert the vehicle key into the rear compartment lock cylinder,located above the license plate and cycle the key 5 times within 5 seconds.

5. The DIC will display: READY FOR FOB X (X = fob 2, 3, or 4).

6. Place the replacement key fob in the glove box fob pocket with the buttons facing right.

7. A beep will occur and the DIC will display: READY FOR FOB X (X = fob 3 or 4) or MAX FOBS LEARNED.

8. If programming additional key fobs, repeat steps 5 and 6, or press the OFF/ACC portion

of the ignition switch to exit programming mode.

9. Operate the active portion of each key fob in order to verify correct system operation.

We do not send programming instructions with packages.