220V Sensor 200W
Features:
Infrared technology based automatic motion sensor switch
Automatic turn ON/OFF while detected people come or left
Automatic locked in day time to save energy
Easy to install or replace existing switch
Good solution for energy saving
Specifications:
Voltage: AC 220V
Load power: 200W
Induction distance: 5-8M
Light intensity of illumination: 6LUX
Angle of induction: 100°
Time extension: 30s ±10s
Color: White
Size (L*W*H): Approx. 6.3cm x 3.8cm x 2.8cm/2.5"x1.5"x1.1"
Package Include: 1 x Body Sensor Intelligent Switch
220V Sensor 110°
Parameter:
1.Sensing Mode:PIR sensing + light control
2.Rated Voltage:220V 50HZ
3.Output Way:controllable silicon
4.Load Power:
Filament lamp 100W
Electricity saving lamp 30W
LED 18W
5.Delay:20s (people are moving within the sensing range, the switch will auto delay and keep connecting;if people stay still,switch will stop responsing)
6.Sensing Distance:3-6m (high temperature will influence switch sensibility)
7.Sensing Angle:110°
Features:
1.Adaptive to filament, electricity saving lamp
2.This lamp is internal equipped with auto body sensor.If poeple come.the lam will power on;if people leave,the lamp will power off
3.Inner body auto sensor adopts infrared heat releasing device,and it can accurately capture moving low frequency signal and automatically power on
4.When people leave,the lamp will auto dalay power off,convenient and energy saving
5.Inner side of the lap is set up with auto ambient brightness detecting circuit.Only when ambient brightness is lower than setting value,the sensor will receive sense and let the lamp power off.And it is energy saving.
Package Include: 1 x 110° 220V PIR Induction Light Control Ceiling Lamp Body Infrared Switch
220V Sensor 50Hz
Specifications:
Voltage: AC 220V /50Hz
Load power: standby < 0.5W
Induction distance: 4-8M (Adjustable)
Time extension: 10s-70s (Adjustable)
Light up: Light control, can not be adjusted
Sensing Angle: 180x360°
Environment temperature: -10℃ ~ 60℃
Color: White
Size: 4.8 x 3.5 x 2.2cm/1.9" x 1.4" x 0.87"(L*W*T)
Wire Length: 14cm/5.7"
Fixing Hole Size: 8 x 3mm/0.31" x 0.12"(L*W)
Fixing Hole Center Distance: 28mm/1.1"
Scope: corridors, aisles, stairs
Load type: incandescent, energy saving lamps, lamp, LED
Load type: incandescent lamp ≤ 100W, energy saving lamps, circular tube ≤ 32W, LED ≤ 15W
Package include: 1 x 220V Infrared Body Motion Sensor Switch Microwave Radar
220V Sensor 360°
Specification:
Working Voltage: AC 220V 50Hz
Load power: Incandescent lamp ≤ 100W CFL ≤32W
Sensing range: 180x360 °
Sensing range: ≤ 8m
Size：50x36x25mm
Install cable length: 16cm
Ambient temperature: -20 ℃ ~ + 50 ℃
Their power consumption: ≤0.2W
Delay time: 30 seconds
Sensitivity: 7LUX
Detection speed: 0.6-1.5 m / sec
Feature:
Radar switch sensing distance far enough, wide angle, no dead zone, can penetrate glass, and thin wood, depending on the power and can penetrate walls of different thicknesses, from the environment, temperature, dust and other effects, in the case of more than 37 degrees , the sensing range is not shortened, the temperature sensing distance becomes constant. I hope sensing angle a small point, you can set the switch sides of the metal obstruction, or choose our restaurant infrared body sensor switch. Radar can pass through walls of 25cm hollow home.
1. Smart sensor: When someone enters the detection range of the product, the microwave detector operating point lights when people leave the detection range, the light automatically goes off. It can automatically identify day and night.
2. Smart delay: switch after detecting the human body every activity will be automatically extended cycle, and extended time of the last human activities as the starting point.
3. Work: After induction switch is turned on, the delay period, if human activity, the switch will continue on until people leave and extended time.
The photosensitive control: according to the outside light intensity, to control the switch is working to achieve energy savings.
4. Adjustable delay: clockwise, counterclockwise adjustment, 15-30 seconds
Use: hallway, corridor, basement, garage, storage, monitoring and other indoor (outside) energy-saving automatic lighting situations.
Package Include: 1 x 220V Infrared Body Motion Radar Sensor Switch Microwave Detector
220V Sensor 16A
Features:
Voltage: AC 220V
Frequency: 50-60Hz
Load current: 16A
Ambient temp: -20 °C to +50 °C
Power consumption: Max 2.0W
Operating lllumination:
Turn-ON Less 30Lus
Turn-off Less 150Lus
Package Include: 1 x Automatic Auto On Off Street Light Switch Photo Control Sensor for AC 220V
220V Sensor 200W
Features:
Infrared technology based automatic motion sensor switch
Automatic turn ON/OFF while detected people come or left
Automatic locked in day time to save energy
Easy to install or replace existing switch
Good solution for energy saving
Specifications:
Voltage: AC 220V
Load power: 200W
Induction distance: 5-8M
Light intensity of illumination: 6LUX
Angle of induction: 100°
Time extension: 30s ±10s
Color: White
Size (L*W*H): Approx. 6.3cm x 3.8cm x 2.8cm/2.5"x1.5"x1.1"
Package Include: 1 x Body Sensor Intelligent Switch
220V Sensor 110°
Parameter:
1.Sensing Mode:PIR sensing + light control
2.Rated Voltage:220V 50HZ
3.Output Way:controllable silicon
4.Load Power:
Filament lamp 100W
Electricity saving lamp 30W
LED 18W
5.Delay:20s (people are moving within the sensing range, the switch will auto delay and keep connecting;if people stay still,switch will stop responsing)
6.Sensing Distance:3-6m (high temperature will influence switch sensibility)
7.Sensing Angle:110°
Features:
1.Adaptive to filament, electricity saving lamp
2.This lamp is internal equipped with auto body sensor.If poeple come.the lam will power on;if people leave,the lamp will power off
3.Inner body auto sensor adopts infrared heat releasing device,and it can accurately capture moving low frequency signal and automatically power on
4.When people leave,the lamp will auto dalay power off,convenient and energy saving
5.Inner side of the lap is set up with auto ambient brightness detecting circuit.Only when ambient brightness is lower than setting value,the sensor will receive sense and let the lamp power off.And it is energy saving.
Package Include: 1 x 110° 220V PIR Induction Light Control Ceiling Lamp Body Infrared Switch
220V Sensor 50Hz
Specifications:
Voltage: AC 220V /50Hz
Load power: standby < 0.5W
Induction distance: 4-8M (Adjustable)
Time extension: 10s-70s (Adjustable)
Light up: Light control, can not be adjusted
Sensing Angle: 180x360°
Environment temperature: -10℃ ~ 60℃
Color: White
Size: 4.8 x 3.5 x 2.2cm/1.9" x 1.4" x 0.87"(L*W*T)
Wire Length: 14cm/5.7"
Fixing Hole Size: 8 x 3mm/0.31" x 0.12"(L*W)
Fixing Hole Center Distance: 28mm/1.1"
Scope: corridors, aisles, stairs
Load type: incandescent, energy saving lamps, lamp, LED
Load type: incandescent lamp ≤ 100W, energy saving lamps, circular tube ≤ 32W, LED ≤ 15W
Package include: 1 x 220V Infrared Body Motion Sensor Switch Microwave Radar
220V Sensor 360°
Specification:
Working Voltage: AC 220V 50Hz
Load power: Incandescent lamp ≤ 100W CFL ≤32W
Sensing range: 180x360 °
Sensing range: ≤ 8m
Size：50x36x25mm
Install cable length: 16cm
Ambient temperature: -20 ℃ ~ + 50 ℃
Their power consumption: ≤0.2W
Delay time: 30 seconds
Sensitivity: 7LUX
Detection speed: 0.6-1.5 m / sec
Feature:
Radar switch sensing distance far enough, wide angle, no dead zone, can penetrate glass, and thin wood, depending on the power and can penetrate walls of different thicknesses, from the environment, temperature, dust and other effects, in the case of more than 37 degrees , the sensing range is not shortened, the temperature sensing distance becomes constant. I hope sensing angle a small point, you can set the switch sides of the metal obstruction, or choose our restaurant infrared body sensor switch. Radar can pass through walls of 25cm hollow home.
1. Smart sensor: When someone enters the detection range of the product, the microwave detector operating point lights when people leave the detection range, the light automatically goes off. It can automatically identify day and night.
2. Smart delay: switch after detecting the human body every activity will be automatically extended cycle, and extended time of the last human activities as the starting point.
3. Work: After induction switch is turned on, the delay period, if human activity, the switch will continue on until people leave and extended time.
The photosensitive control: according to the outside light intensity, to control the switch is working to achieve energy savings.
4. Adjustable delay: clockwise, counterclockwise adjustment, 15-30 seconds
Use: hallway, corridor, basement, garage, storage, monitoring and other indoor (outside) energy-saving automatic lighting situations.
Package Include: 1 x 220V Infrared Body Motion Radar Sensor Switch Microwave Detector
220V Sensor 16A
Features:
Voltage: AC 220V
Frequency: 50-60Hz
Load current: 16A
Ambient temp: -20 °C to +50 °C
Power consumption: Max 2.0W
Operating lllumination:
Turn-ON Less 30Lus
Turn-off Less 150Lus
Package Include: 1 x Automatic Auto On Off Street Light Switch Photo Control Sensor for AC 220V
Am 16.10.2023 hat der Verkäufer die folgenden Angaben hinzugefügt: