100-650mm Digital Fuel Level Indicator Sensor Stainless steel Alarm Dual Tank Gauge Warning Volt

2022 New 52mm Universal 2 in 1 Dual Gauge

Application: Marine Boats/Truck/Bus/Motor Home/Hot Rod/Generators

About the Gauge Reading:

The device works, with a little delay (about 20-80 seconds) of changes in the readings. Apparently, it is done in order not to react to the splash of water in the tank.

Gauge Connection:

black line connect to the negative line,
red line connect to the positive line,
green line connect to the sensor signal line,
yellow line is exchange button line

Gauge Feature:

- 52mm diameter Two in One Gauge show with easy installation
- Programmable Input Resistance Ohm Signal to adapt different fuel /water/temperature sensor
0-190Ω, 0-180Ω, 10-180Ω, 240-33Ω, 240-30Ω
- High Resolution View under sunshine
- Installation Diameter: 52mm (2inch)
- Reverse polarity protection and anti-fogging performance
- Working Voltage:12V/24V
- Working temperatures: - 40 to 85°C
- IP66 Waterproof
- Fuel Level Gauge Alarm Set: ≤20%
- Voltmeter Alarm Set: <10.8V

INSTALLATION GUIDE

1. Cut an Φ52mm (2-1/16") hole in the panel (II) allow a clearance of 55mm (2 3/16"). behind the panel.
2. Remove fastening ring (I), insert gauge from front. Tighten gauge (III) using fastening ring ( I)
3. Connect cables according to the diagram/label.

Setting Menu:"Unit" "R 1" "R 2"

1.Hold & Press the button, Power On Gauge, the LED screen will show Switch Show
Unit, R1, R2
2.Unit
Fuel Gauge, Water Level, HTG Sewage Level: %
Water temperature: ℃ or ℉
3.R1---Configure Top Row Signal Range
Press Button to switch 000 ~006
For example, LED will show 001, which means 0~180ohm, then release the button and wait digital flash to complete to save setting

4.R2---Configure Top Row Signal Range
Press Button to switch 000 ~006.
For example, LED will show "002" , which means 10~180ohm, then release the button and wait digital flash to complete to save setting

Package:

1 PCS Gauge+cable+manual