Please
see advert for a Rebuild service for your own calipers for the make |
and model
in the title above. You will need to send your calipers into us for a rebuild
service, please contact for send to address. |
We have tried to be accurate in our advertising but if your caliper does not match the piston quantity advertised then rest assured, we can accommodate most brakes
so please just get in touch or just send us your caliper and we can arrange payment
once the work is done according to your brake caliper. |
Ads are
for one caliper, so if you have more than one that you need rebuild you will
need to purchase the amount needed. |
What we
will do with your calipers; |
1.
Disassemble calipers and clean all parts removing all dirt on the caliper
shells and pistons. |
2. Polish
the pistons up after examining to prolong the life |
3. Clear
the seal groves thoroughly of all corrosion along with all threads. |
4.
Rebuild calipers using high quality seals. |
5. We
replace all bleed screws, rubber boots & gaiters, caliper bolts if they
have them. |
6. We
will complete a pressure test to ensure the caliper is operating as it
should. |
7. We
have pad pins, brake pads and stainless-steel Banjo bolts available, charged
extra. |
8. If
pistons are damaged, we will notify you before we rebuild the calipers so
that you have the final say if you want new ones or not. |
If you do
want a refurbishment service instead where calipers are remanufactured, we
offer this too. Please get in touch or please see our other ads. |
Instructions
for the process are below but if you need more info please contact us, we are
happy to help and advise; |
1.
Disconnect
your caliper from the mounts and from the banjo bolt. Remove all loose
fittings, Banjo bolts, pads, pad pins , pad covers ect. |
2.
Drain
your calipers completely free of brake fluid |
3.
Protect
your calipers by wrapping them in bubble wrap for example. |
4.
Box
your calipers but before you tape the box shut…. |
5.
Include
a note in with your calipers with your Name, number/email address, Rebuild
service and your return address. Put this note in a plastic bag so
that any remaining brake fluid from your calipers doesn't make the ink
run. |
6.
Send
your calipers with a trusted carrier to our address - (Please message for the
address on where to send your calipers to) we can help with organising to
send the calipers to us. |
7.
From
us receiving your brakes we will turn them around in 3 working days, as soon
as we get payment (unless payment was made upfront) we will return to you on
a over night service. |
8.
For
payment, you can either pay by bank transfer on completion via the invoice,
pay upfront through the ebay ad or we can send you a secure link to pay
on completion if that suits you better. We are a honest seller and we
pride ourselves on customer trust so if you want a phone call before sending
us your calipers to get a better understanding of how the process works just
drop us a message with a time that suits you and we will call you back. |
Note. If we find any damage to
your pistons or any other parts of your caliper we will get in touch with you
to discuss replacements at an additional cost, we will only every recommend
changing pistons, we leave the final decision to you. |