9IMOD 1/4PCS 35A/45A/70A Brushless ESC BLHeli_32 BLHeli_S 2-6S Lipo Electronic Speed Controller Built-in RGB LED Support Dshot 150/300/600 for RC FPV Racing Drone Quadcopter Airplane Parts
BLHeli_32 70A ESC

Features:
1.ESC Brushless: Aria BLHelii_32bit 70A ESC With 32bit ARM Cortex MCU STM32F051 48MHZ micro processor, throttle 2048 resolution ratio,strong anti-interference capacity
2.Drone ESC 6S: The electronic speed controller support Blheli_32 firmware,can use the signal wire to upgrade the firmware or change the configuration on line.It use the self-adaption control system,can go automatic with the all kind of the motor in the market,at the mean time it support up to 500HZ PWM,oneshot 125,oneshot 42,Multishot and Dshot 150/300/600/1200 Input voltage: 3-6S Lipo
3.Drone ESC Controller Configuration: Built-in sensor can be reaction of temperature,output power,output current etc,also programmable for protection.
4.USB Linker RC ESC Brushless: Electronic speed controller can be programmable throttle setting like support positive and negative,two way mode,FPV 3D mode,motor speed,braking ,PWM frequency, inlet angle speed setting, onboard RGB LED for customize color, Beep etc
5.6s ESC Performance:The drone ESC with special optimize in multi-axis,the motor can launch smoother in a good throttle curve, fast response,great power, and highly support the multi-axis,fixed-wing and helicopter.

Description:
70A 3-6S BLheli_32bit Brushless RC Drone ESC with special optimize in multi-axis,the motor can launch smoother in a good throttle curve, fast response,great power, and highly support the multi-axis,fixed-wing and helicopter.The twisted-pair signal wire can lower the crosstalk inside cooper wire when it transfer,which will make the flight more stable.

Specifications:
Brand: 9IMOD
Item Name: Aria BLHelii_32bit Brushless ESC
Con. current: 70A
Burst current(A)>10s: 80A
Input voltage: 3-6S Lipo
BEC: NO
Size: 42*21.5mm
Weight: 9.52g(without motor wires)

BLHeli_S 35A/45A ESC
Features:
1. The latest EFM8BB21F16G high-speed control chip. Integrated Programmable RGB multi-color LED lights make night flight more cool. Supports BLHeli_S/DSHot150/300/600 digital throttle with strong anti-interference ability and fast response.
2. By default, hardware PWM is enabled. Dampedlight hardware PWM drives motors with low noise and smoother throttle response.
3. Adopting a 6-layer, 3-ounce copper thick high-quality PCB, with a layered layout of high current and small control signals, enhancing anti-interference ability.
4. Moreover, the gold plating process on the surface of the PCB effectively improves the current resistance and heat dissipation ability.
5. Damped Light mode, regenerative braking function, makes motor deceleration more sensitive, more precise effective control, and active continuous current technology, allowing the battery to recover power and extend endurance time.

Descriptions:
35A/45A BLHeli_S Brushless Electronic Speed Controller Equipped with EMF8BB21F16G MCU, Support Damped mode: Dshot150 Dshot300 Dshot600 Oneshot125. Designed for superior performance in multirotors. Suiltable for FPV Racing Drone Multicopter Quadcopter.

Specifications:
Model: BLS-35A/45A
Input Voltage:（2-6S）;Battery: 2-6S.
Working Current：
35A: Con.Current 35A, Max 45A/10S
45A: Con.Current 45A, Max 55A/10S
BEC:NO
Support protocols: Dshot 150/300/600, oneshot 125
Firmware: BLheli_S
Bootloader: Yes
Chips on EFM8BB21F16G.
Weight: about 6.6g
Size: 28.5x13mm
Power cord length: 18AWG 90mm
Signal cord length: about 150mm

Package Included:
1/4 x ESC(optional)

Note:
Only the above package content, other products are not included.
1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2.Due to the manual measurement and different measurement methods, please allow 1-3mm deviation.Thanks!

Before purchase:
1.All the goods are ready stock, we will arrange the shipment at once if we receive the order.
2.Please read the item description, if you have any question, do not hesitate to contact us.
3.No warranty,if you receive a defect item,please contact us at once with item picture.
4.Use the vouchers for more saving.

After purchase:
1.If you are satisfied,please express your use feeling.
2.Please contact us before you are going to give us bad review. We are helpful and will solve the problems. If you receive a defect item,please contact us at once with item picture or video.