Features:
Commercial advertisement signs backlight
Channel letters backlight store front light
Advertisement light box backlight & decoration sign
Ideal replacement of incandescent and fluorescent lights
LOGO advertising billboard, exposed luminous characters
Suitable for boat cabin & deck lighting, stair, kitchen, courtesy, caravan, garden etc.
Note :
-20pcs led module each string, they can also be cut off on customer's requirement, be sure you cut the connect line between the strip.
-The controller is optional, but the battery is not included.
-The power supply is optional, but we we do not take responsibility for the installation,please let the profession man to install.
Module Specifications:
Type: 6 LED 5054 module
Material: PVC Plastic
LED Quantity: 6pcs each strip
Standard Cascade: 20 strip one set
Beam angle: 120 degree
Waterproof level: IP65
Working Voltage: DC 12V
Power: 0.25W / each led
Dimension: 76*10*5mm / 2.99 * 0.39 * 0.20inch (each 6 led strip)
Total length of each module with extension wire: 3m / 10ft
Optional color: White, Warm White, Red, Green, Blue, Yellow
Luminous Flux: 780-900lm/20pcs
Working Temperature: -20~50℃
Package included:
1 x LED 5054 module (20 strip one set)
(remote controller and power supply is optional)
Description of the connection between modules:
1 :Find the end of the wire, cut a length of cover about 5cm (do not cut the copper wire, only cut the cover)
2 : Connect two strip light , make sure the copper wire are fully contact to each other. (please confirm the negative and positive is right)
3 : Use the insulating tape surrounding the connecting position to prevent the electric leakage
The Modle Kits Connection:
Step 1: remove the remote battery insulation film, check the remote batter is connected.
Step 2: Connect the LED and mini DC adapter with a screwdriver, attention to positive and negative pole.
Step 3: Separate LED strip. Connect the remote and plug. Finish! Good job.
1 :Find the end of the wire, cut a length of cover about 5cm (do not cut the copper wire, only cut the cover)
2 : Connect two strip light , make sure the copper wire are fully contact to each other. (please confirm the negative and positive is right)
3 : Use the insulating tape surrounding the connecting position to prevent the electric leakage
The Modle Kits Connection:
Step 1: remove the remote battery insulation film, check the remote batter is connected.
Step 2: Connect the LED and mini DC adapter with a screwdriver, attention to positive and negative pole.
Step 3: Separate LED strip. Connect the remote and plug. Finish! Good job.
