eBay

【Energy Saving】 This heat-powered stove fan a requires no batteries or electricity and is designed to circulate the hot air produced by wood/coal or pellets. The 6-blade heat fan efficiently circulates the heat generated by the fireplace while increasing stability, has been tested and proven to save 28% on fuel costs and reduce wood consumption in the stove.
【Improved 6 Blade Stove Fan】 Compared to ordinary 5-blade or 4-blade chimney fans, the Improved 6-blade stove fan heats faster and has more air volume, is made of anodized aluminum, when the fireplace fan gets hot Will not rust or corrode. With a sturdy base, it won't shake or tip, even at maximum wind speed. A magnetic thermometer is included to monitor fireplace temperature.
【Overheating Protection】 The Stove Fan is equipped with a high temperature resistant chip, Usually, the fan rotates around 55°C/131°F. When the temperature reaches around 482°F- 572°F, the fan has the highest rotation efficiency. If the surface temperature exceeds 350°C/662°F, there is a bimetal safety device at the bottom of the fan, which will lift the front of the fan to protect the motor.
【Ventilateur De Poele Silencieux 】 The new 6-blade design not only has a larger air volume, but also makes less noise with less than 25 dB nuisance. You can enjoy warm air in a quiet, comfortable environment. Can be used as a wood stove fan, gas stove fan, electric stove fan, wood stove fan, fireplace fan and pellet stove fan.
【High Quality Material】The fireplace fan is made of anodized aluminum and is resistant to abrasion, high temperatures and corrosion. It can be used in combination with various heaters. It will not deform or oxidize even if it is used under high temperature for a long time. Easy to use outdoors, the small handle on the fan is easy to carry.

Product Description

6-Blade Stove Fan

No electric fan, save fuel and heat your home more evenly and efficiently.

Upgrade the 6-blade wood stove fan to heat faster, efficiently use the heat energy from the fireplace to drive the fireplace motor, so the heat from the fireplace circulates more efficiently throughout the room, saving you 28% fuel and enjoying the warmth at the same time.

Features:

1) Circulates warm air throughout the room.

2) Requires no electricity, no running costs.

3) Enhance 6 blades, fast rotation speed up to 1400rmp.

4) Maximizes stove efficiency.

5) Quiet operation, no noise, ready to use out of the box.

6) Comes with an induction stove thermometer to help monitor temperature.

Improved 6-blade design

The 6-blade wood stove fan can circulate 30% more hot air than conventional 4-blade fans. The fan base and wings are made of anodized aluminum and will not rust, corrode or warp.

Overheating protection

A bimetal strip is integrated into the bottom of the stove fan to raise the fan edge slightly when it is close to maximum operating temperature, to protect the stove fan motor and thermoelectric module.

Quiet operation

The operating noise of the chimney fan is less than 25 dB, the only moving part is the blade assembly.You won't even know the fan is there - but you'll feel the heat!

Note:

1.When moving or transporting the fan, always use the extendable handle while wearing gloves. Please keep the fan out of the reach of small children when in use.

2.The appropriate temperature range is 55° C/131°F to 350° C/662°F. Temperatures above this range may damage the fan and the generator.

3.to maximize the performance of your fan, make sure to position it on a flat, smooth surface on top of your stove near the side or back of the stovepipe.

4.A chimney that is too thick affects temperature transfer and may not reach the fan's starting temperature, preventing the fan from operating.