JEYI Cooling Heatsink RGB Aura Sync M.2 NGFF 2280 SSD Heatsink with 237W/mk Thermal Pads Heatsink Cooler Radiator PC Accessories
Feature:
1. RGB colorful light effect: Godfins Gen1 RGB version supports Aura Sync, with cool light effect
2. Material: Made of magnesium-aluminum alloy, with efficient heat dissipation channel design. Striped lines, sharp edges and corners, very "technical aesthetics". Multi-channel base design, more efficient heat dissipation. Effectively discharge heat, fully interact with external oxygen, and increase the heat dissipation area
3. Multi-layer heat conduction, efficient cooling of the hard disk: It is intimately equipped with a variety of high-efficiency heat-conducting silicon pad heatsinks of different specifications, with a thermal conductivity of 237W/mk
4. 38 larger heat dissipation fins: The larger heat dissipation area can take away the heat generated by the SSD core faster, and can effectively reduce the temperature of the M.2 hard drive by 10-30 degrees Celsius. The design of the lateral fins can use the airflow of the lower pressure radiator to dissipate heat after for the ITX motherboard is installed
5. Installation height: The installation height of the radiator is 20mm/0.79in, 23mm/0.91in, please pay attention to the distance from the graphics card and the CPU radiator. Support NVME/NGFF dual protocol M.2 hard disk. 22x80 size, B key, M key

 

Specification:
Origin: Mainland China
Model Number: SSD Heatsink
Type: M.2 SSD Cooler
RGB Support: RGB
Brand: JEYI
Model: Godfins Gen1
Style: NO RGB, with RGB (optional)
Color: Grey
Material: Magnesium aluminum alloy
Size: Ps: The height marked below is the thickness of the heat sink itself, and the actual use needs to be included in the thickness of the thermal conductive silicon wafer and the heat dissipation base.
NO RGB: 78x23x20mm/3.07x0.91x0.79in
With RGB: 78x27x23mm/3.07x1.06x0.91in
Weight: 60g
Applicable accessory type: Support NVME/NGFF dual protocol M.2 hard disk. 22x80 size, B key, M key

Installation steps:
1. Paste silicon chip: M.2 hard disk is pasted with thermal conductive silicon chip
2. Home fixing screws: Place and fix the side screws in order
3. Installation: Place it in the M.2 hard disk position of the motherboard and fix the tail screws

Note:
This product is only a radiator, it does not contain the SSD disk in the display, and will not be elaborated in the description.
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.