Overview
SNZB-01P is an iterative upgrade of SNZB-01. It is a very compact and portable wireless switch that can be attached and used. It can also be linked to other devices by setting up smart scenes.
SONOFF SNZB-01P is a small Zigbee wireless smart switch that can even fit in your pocket, with preset actions for single press, double press, and long press to control multiple devices.
Compared with SNZB-01, SNZB-01P has improved design and performance. With a larger button area, 5 years battery life, external pairing button, the battery is easier to install and replace.
SNZB-01P can be placed wherever your need, or stick with 3M Adhesive and a metal plate on a flat surface anywhere, then create a smart scene, like turning off all devices with one lick. Two-way control is even available for you to turn on/off the light from two locations.
Besides, The SNZB-01P can also be used as a doorbell when connected to the NSPanel Pro, you will be notified when visitors press the wireless switch.
SNZB-01P is battery-operated, your mobile phone will receive a low-battery notification when the remaining battery level is low. SNZB-01P support checking 3 months' history.
SNZB-01P can be placed wherever your need, or stuck with 3M Adhesive and a metal plate on a flat surface anywhere.
SNZB-01P
【Custom Button Action】You can customize the button actions as you want. Control multiple devices by single press, double press, and long press.
【Zigbee 3.0 Compatible】Supports Zigbee hubs using the Zigbee 3.0 protocol, and theoretically supports adding to any Zigbee hub developed in accordance with Zigbee 3.0 protocols. Like SONOFF NSPanel Pro, ZB Bridge Pro, and ZBDongle-E.
【Trigger Alexa Routines】Trigger Alexa Routines with the press of the wireless switch (requires SONOFF Zigbee hub).
【Emergency Button】SNZB-01P can be used as an emergency button when an emergency occurs, your family can press the button to send an alert notification to your phone.
【5 Years Battery Life】Powered by a CR2477 battery. *The battery life data is obtained from SONOFF’s internal laboratory, please refer to the actual use.
Note : SNZB-01P needs to be used with Zigbee Hub.
Add SNZB-01P on the gateway
● When the device is used for the first time after being powered on, it will enter the network distribution state by default, and the device indicator light will flash slowly.
● If it is not the first time, press and hold the device for 5s to enter the network configuration state.
*If no pairing is performed with the gateway within 3 minutes, the device will exit the network configuration state. If you need to configure the network again, please press and hold the device network configuration button for 5 seconds until the device indicator light flashes slowly.
Support gateway
1. Sonnuo ZBBridge
2. Sonnuo ZBBridge-P
3. NSPanel PRO
4. Sonnuo AIBridge
5. Sonnuo Dongel (HA&OpenHAB)# supports Zigbee2mqtt (ZHA)
6. Samsung SmartThings hub V3
7. Samsung AeoTec Smart Home Hub V3
OTA capability
SNZB-01P supports OTA capabilities in some SONOFF gateways
Support OTA: ZBbridge-P, NSPanel Pro, iHost
Unable to OTA: ZBbridge
The main function
The wireless button supports three operations: single click, double click, and long press.
Verify communication distance function
● After adding to the gateway, click the device network configuration button. If it flashes twice quickly, it means the current location is OK; if it flashes slowly, it means the communication quality at the current location is poor and the installation distance needs to be shortened.
3. Low battery notification
● When the device power is lower than 10%, the App sends a push message
Common Problem
1.How many times can SNZB-01P be pressed?
● About 100,000 times
2. Are there any sensor components inside SNZB-01P?
There are no sensor components inside SNZB-01P. It is realized through structure and hardware buttons, which are rebound buttons similar to the picture below.
