Note：
CAN function and other function needs to be customised, please contact us.
This Link only support Bluetooth, UART communication. If you need UART function，please extra buy UART cable in this listing.
Daly BT BMS
Feature：
1)Over charge protection
2)Over discharge protection
3)Over current protection
4)Over heat protection
5)Short circuit protection
6)Waterproof
Specification：
Name：Lifepo4 BT BMS common port with balance
Battery Type：Lifepo4
Norminal Voltage：3.2V
Colour:Red
Material:metal
Bluetooth module：
specification:
Product name: Bluetooth module
Color: as shown
Material: Plastic + Metal
Bluetooth module : available connect with Android and IOS App and can review the battery status in real time by mobile phone.
3.0" colour power level display：
Screen size: 3 inches
Suitable for voltage: 0-999V
Suitable for current: 0-999A
Applicable temperature: -20-75°C
Power consumption: <20mA
Power display: 0%-100%
Description of power display: Display 0 = 0% power remaining, Display 1 = 25% power remaining,
Display 2 = 50% power remaining, Display 3 = 75% power remaining, Display 4 = 100% power
remaining
LCD display：
Material: ABS shell + LCD screen
Color: Shell: black, display light color: blue
NOTE:
The product is in English.
Product activation introduction：
For our smart bms,when first use,need to activate first,then B- P- can be conductive,voltage from P- can be same from B-, then BMS can work well.
Method ①: there is an activation switch on the board and click the button.
Method ②: Press thebuttonon the bluetooth module to activate the bms directly.
Method ③: Charge activation, B-line must be connected to the total negative pole of the battery pack when
1A Active Balancer
1.The newly designed DALY battery equalizer adopts the latest transformer inversion active energy
transfer technology to balance the voltage difference of large capacity battery pack, recover battery
capacity, refresh your battery pack and extend the battery usage life.
2.1A equalizing current realizes the ultra-fast energy transfer between each string battery. The
equalized voltage difference can be reduced to 0.01-0.02V, bringing you an efficient and reliable
battery equalization experience.
3.The aluminum cooling fin dissipates heat rapidly when equalizer is working
4.Suitable for :Li-ion Battery、 lifepo4 Battery、LTO Battery
5.You can download the mobile APP and check the battery balance current information at any time
◆ Pls refer to following link to understand how to use the touchable LCD
https://www.dalyelec.cn/newsshow.php?cid=24&id=76&lang=1
◆ Pls refer to following link to understand how to use bluetooth function
https://www.dalyelec.cn/newsshow.php?cid=24&id=74&lang=1
◆ Pls refer to following link to understand how to use PC function(UART communication)
https://www.dalyelec.cn/newsshow.php?cid=24&id=65&lang=1
The package includes:(optional)
1* LiFePo4 BT BMS
1*Cable
1*NTC Temperature Sensor
1*Bluetooth module
1*UART Cable (optional)
1*Touch Screen (optional)
1*Active Balancer (optional)
FAQ
Q: How do I know what material OR type my battery is ?
A: Please look the battery body,if the normal voltage of your battery shows 3.2V,the battery is LiFePo4.If the normal voltage of your battery shows 3.6V or 3.7V, the battery is Li-ion or Li-polymer battery, You can also ask battery manufacturer for the material of battery.
Q: Is this BMS suit for my battery?
A: This BMS suit your battery or not depends on below 2 points:
How many series you cell is in your battery pack? The BMS you buy must be same series as your battery pack.
What material your battery is? Only the LiFePo4 battery has different electric parameter from other battery, so if you need buy the BMS for LiFePo4, Please let us know firstly.
Q: What is the Common port and Separate port? what is the difference?
A: We take 13S 48V16A BMS as example:
Common port 16A means your charge cathode and discharge cathode are connected in the same point end (our P-), charge cathode and discharge cathode are used in the common connection port, so the charge current and discharge current are same as 16A.
Separate port is separately connected by charge cathode (our C-) and discharge cathode (our P-), so the charge current and discharge current are different, discharge current is 16A, charge current is 8A.
Q: What is the balance function?Do we need cell balance or not?
A: The working principle and function are as followings:
When your one cell voltage was reached balance voltage(Li-ion 4.18V, LifePo4 3.6V), that cell balance start work, balance resistance starts discharge with 35mA, that cell was in both charging and discharging status, and other cells were not reached balance voltage(Li-ion 4.18V, Life Po43.6V), so they are only in charging status, when the fast cell voltage was reached overcharge voltage (Li-ion 4.25V, Life Po4 3.75V),BMS starts off power protection, all the cells are stop charging, this process will enable your battery charging in balance current, and your battery voltage are in balance status.
However, if your cell voltage difference are in a big range, The equilibrium effect is almost zero,The solution is to replace cells with large voltage gaps.
Q: The relationship between battery capacity(AH or mAH) and BMS current(A)?
A:There is no direct relationship between battery capacity and BMS current, big capacity doesn't mean big current, but rely on continue current, that is to say if your engine is powerful, you should choose high current of BMS, it is not relied on battery capacity.
Q: What type of charger should i choose?
A: Lithium battery must choose specific charger, don't use charger for leadacid battery, for leadacid charger may have MOS with high pressure breakdown protection, which will not protect of BMS over charge. LiFePo4 battery charger voltage = number of battery strings X 3.6V, while Li-ion battery charger voltage = number of battery strings X 4.2V.
Q: What current BMS should I choose ?
A: Take 10S 36V as example:
What current BMS you choose is depend on your E-bicycle motor power and current limitation of controller,eg.16A for 350W and below, 25A for 500W and below, 35A for 800W and below, 60A for 1000W and below, over 1200W are contact with our service specialist for suggestion, continue current shall be higher than current limitation in controller.
Q: Do you have Minimum Order Requirement (MOQ)?
A: No, we don't have MOQ. different customer have different requirement ,we can provide various capacity and size as per your requirements, also ODM / OEM is welcome.
Q: What is your term of payment?
A: PayPal, T/T, L/C,Western Union and so on, everything can be talk.
Q: How to contact for BMS?
A: Please send messages at below or E-mail us and we are always glad to help you with BMS.
