"DSO138 Product + case

Product desceiption:                        
Training for electronic production , complete detailed descriptive information ,
including schematics , production guidance , instructions ,
troubleshooting methods , etc., making a high success rate .
Component species diversity for students to identify elements ,
inline elements welding, soldering SMD components training.
Students can get in at the same time making a practical tool
for audio, video synchronization , low-frequency switching power supply ,
infrared receiver transmitter signal waveform and many other occasions,
effectively observed and measured , increased interest in learning, improve learning outcomes .
Kits using ARM Cortex-M3 processor (STM32F103C8),
and includes a 2.4 -inch color TFT display can be used as test ARM development board .
Available source , the ability of a friend can be secondary development kit based on ,
for example, it can be changed to Millivoltmeter , data loggers , and so on .
Circuit is simple , reliable , inexpensive
 
Performance

Maximum real-time sampling rate : 1Msps
Accuracy : 12Bit
Sampling buffer depth : 1024 bytes
Analog bandwidth : 0 - 200KHz
Vertical Sensitivity : 10mV / Div - 5V / Div ( 1-2-5 progressive manner )
Adjustable vertical displacement , and with instructions
Input impedance : 1MΩ
Maximum input voltage : 50Vpp (1: 1 probe ), 400Vpp (10: 1 probe )
Coupling modes include DC / AC / GND
The horizontal time base range : 10μs / Div - 50s / Div ( 1-2-5 progressive manner )
With automatic, regular and one-shot mode , easy to capture the moment waveform
Available rising or falling edge trigger
Adjustable trigger level position , and with instructions
Observable trigger waveform before ( negative delay )
Can freeze at any time waveform display (HOLD function )
Comes 1Hz /3.3V square wave test signal source

Note:

This is a Soldered DSO138 2.4"" TFT Digital Oscilloscope together with an acrylic case kits which you need to DIY

Package included:

1X Soldered DSO138 2.4"" TFT Digital Oscilloscope
1X Acrylic Case


DSO138 Kit Product

Performance
Maximum real-time sampling rate : 1Msps
Accuracy : 12Bit
Sampling buffer depth : 1024 bytes
Analog bandwidth : 0 - 200KHz
Vertical Sensitivity : 10mV / Div - 5V / Div ( 1-2-5 progressive manner )
Adjustable vertical displacement , and with instructions
Input impedance : 1MΩ
Maximum input voltage : 50Vpp (1: 1 probe ), 400Vpp (10: 1 probe )
Coupling modes include DC / AC / GND
The horizontal time base range : 10μs / Div - 50s / Div ( 1-2-5 progressive manner )
With automatic, regular and one-shot mode , easy to capture the moment waveform
Available rising or falling edge trigger
Adjustable trigger level position , and with instructions
Observable trigger waveform before ( negative delay )
Can freeze at any time waveform display (HOLD function )
Comes 1Hz /3.3V square wave test signal source
 
 
Package Included:
1 x DSO138 Digital Oscilloscope DIY Kit+ Probe Unsoldered STM32 200khz (this is DIY item show as first photo)
DSO138 Acrylic Case

Note:  The DSO138 oscilloscope is not included!
Features:
DIY cover for DSO138 oscilloscope.
Acrylic material, looks transparent(need to tear down the film).
Easy for electronic enthusiasts to assemble.
Specifications:
Material: Acrylic
Item Weight: 156g / 5.52oz
Package Size: 16 * 10 * 4cm / 6.3 * 3.94 * 1.57in
Package Weight: 192g / 6.79oz
Package List:
1 * Cover for DSO138

Test Probe Cable

BNC Q9 to Dual Alligator Clip Oscilloscope Probe
With standard BNC ends can be used for all Oscilloscope
Apply with 40mm middle size Alligator Clip
With international standard BNC plug, good-looking appearance, sturdy and durable
Cable outside diameter: 4.0±0.1mm
Conducting wire: 23*0.15mm
Cable length: Approx.100cm
Branch conducting wire length: Approx.16cm
Conducting wire outside diameter: 2.5mm
Impedance: 50R
Maximum input voltage: 500V pck
Maximum input current: 2.5A
Operating temperature: -10 ~ 50°C
Storage Temperature: -20 ~ 75°C"