Preparation: Surfaces to be coated must be clean, dry and free from wax, grease and contaminants likely to compromise the adhesion of the paint. If the surface has previously been painted, apply paint to a small test area to check compatibility. Do not apply to damp surfaces. Sources of damp must be eliminated before applying this paint.
Application: STIR WELL BEFORE USE. Do not thin this paint. Apply evenly with a synthetic fibre brush or roller. Cold, damp conditions will significantly extend the drying time. Do not use below 10°C.
Coats: A minimum of 2 coats are required.
Drying Time: Touch dry within 30 minutes, depending on temperature and humidity.
Re-coating Time: 2 - 3 hours minimum, depending on temperature and humidity.
Application Temp: Ideally 15-25°C. Do not use below 10°C or in conditions of high humidity.
Compatibility: Should be compatible with most paint products, however conducting a compatibility test is recommended.
Clean-Up: Clean brushes and hands immediately after use with water. If dried on, clean equipment and brushes with Rustin’s Brush Restorer.
Shelf-life/Storage: Many years in a cool, dry place if stored in original, tightly closed container. Do not store paint below 5°C. Protect from frost and extremes of temperature.
Hazards: Non-flammable. Avoid contact with eyes and skin. Eyes and skin should be rinsed immediately if contact occurs with plenty of water. Seek medical attention. Keep container tightly closed and out of reach of children.