These wired switches allow you to control your overhead, hard-wired Incandescent lights by remote and dim them even if they couldn't be dimmed before!

With these wired switches, you can turn lights on, off and dim them by remote or directly from the light switch. You can even dim your porch lights for dinner party ambiance!
Simply replace your existing wall switches with X10 Decorator Dimmer Wall Switches and you will be able to control them with any X10 remote, PC software, plug-in controller or manually right from the switch itself! FINALLY, you really can control ALL of your lights!

These Decorator Dimmer Switches are perfect for your dining room chandelier, your porch or deck lights, your living room overhead light and even your bedroom lights!

Both white and ivory rocker paddles are included to match with any decor. And since they replace your wall switches, you don't have to worry about an X10 module taking up a wall outlet.

• Control and dim your hard-wired incandescent lights with X10 remotes, X10 PC software, X10 plug-in controllers or manually right from the actual switches
• Perfect for use with your dining room, bedroom, living room, home theater lights and porch/deck lights
• Dim incandescent lights even if they couldn't be dimmed before
• Easy to install - simply replace existing wall switches
• Includes BOTH white and ivory rocker paddles.
• Coverplates are not included.
• Switches rated at 120VAC/60Hz. 500W (incandescent only). 500 Watts maximum load, 40 Watts minimum
• Wiring this switch to non-incandescent loads will permanently damage the switch and voids the warranty
• For Hardwired applications not requiring a wall switch or 3 way capability, use our XPDF INLINE DIMMABLE MODULE
  
• For fluorescent and appliance loads up to 20 Amps, use the WS13A 20 AMP SWITCH
  
• Use with our WS14AOR CS277 companion (slave) switches to replace existing 3 and 4 way switch circuits where lights are controlled by 2 or more switches
• See manual here ftp://ftp.x10.com/pub/manuals/ws12a-14a-is.pdf
• You should have the following to remotely control this module:

        An X10 PLUG IN CONTROLLER OR TIMER or ActiveHome PC interface

  OR

        An X10 WIRELESS REMOTE OR MOTION SENSOR along with a TM751 TRANSCEIVER or ActiveHome PC interface or X10 security base station

IF YOU BUY ITEMS FROM MULTIPLE LISTINGS, DO NOT MAKE SEPARATE PAYMENTS. THIS CREATES SEPARATE SALES RECORDS AND INVOICES AND WILL DELAY PROCESSING AND SHIPMENT OF YOUR ORDERS . I CANNOT COMBINE ORDERS FOR SHIPPING DISCOUNTS (IF AVAILABLE) ONCE YOU MAKE ANY SEPARATE PAYMENTS

THANK YOU FOR LOOKING!!

IF YOU HAVE TROUBLE WITH SOME OF YOUR X10 MODULES AND DEVICES NOT WORKING CLICK HERE AND SEE IF A PHASE COUPLER/SIGNAL BRIDGE CAN HELP!

Check out my other items!

Be sure to add me to your favorites list!

Sign up for my email newsletters by adding my eBay Store to your Favorites

Visit My eBay Store: Big John's Place

IF YOU HAVE TROUBLE WITH SOME OF YOUR X10 MODULES AND DEVICES NOT WORKING CLICK HERE AND SEE IF A PHASE COUPLER/SIGNAL BRIDGE CAN HELP!

NOTE TO INTERNATIONAL BUYERS:

UNLESS OTHERWISE SPECIFIED, THE X10 PRODUCTS ON THE EBAY U.S. SITE USE 120V 60HZ POWER. WIRELESS DEVICES OPERATE ON THE U.S. FREQUENCY OF 310MHZ.

PRICE AND SHIPPING DOES NOT INCLUDE ANY CUSTOMS FEES, DUTIES OR TAXES WHICH ARE THE RESPONSIBILITY OF THE BUYER